92 39 sutphen dominator part out
#1
92 39 sutphen dominator part out
1994 39 sutphen dominator
Part out
Rigged hull on trailer 20k
Less trailer 20
Stripped hull minimal rigging 9k
Motors 615 cid 700 HP. Callies cranks bow tie blocks dyno time on them. 25k pair
CMI big tube with straight trailer 4.5 3500 a set
ASD 8 19 spline , port side needs input shaft bearing. These are a counter rotating drive set. 30k
Drivevline trans 1500 each , have 2 extra clutch’s in them.
4 blade merc props 18.5/30 I believe 1800 set
Trailer 6500 15600 GVW
I will not hold parts or wait for anyone.
Drive will sell before I can sell hull, hull goes before I sell trailer.
Part out
Rigged hull on trailer 20k
Less trailer 20
Stripped hull minimal rigging 9k
Motors 615 cid 700 HP. Callies cranks bow tie blocks dyno time on them. 25k pair
CMI big tube with straight trailer 4.5 3500 a set
ASD 8 19 spline , port side needs input shaft bearing. These are a counter rotating drive set. 30k
Drivevline trans 1500 each , have 2 extra clutch’s in them.
4 blade merc props 18.5/30 I believe 1800 set
Trailer 6500 15600 GVW
I will not hold parts or wait for anyone.
Drive will sell before I can sell hull, hull goes before I sell trailer.
The following users liked this post:
regalman4925 (08-13-2021)
#3
VIP Member
VIP Member
I know the owner before the last owner he’s a mechanic and that boat was meticulously maintained . Not to many 39’s out there, I just hope someone buys the hull and it doesn’t end up in the crusher.