|
Re: Pintle Hitch
Originally Posted by Prater
OK, I now have the XDR on but what is everyone doing for their plug? I use my factory plug on different trailers and there is no where to attach it to the XDR.
|
Re: Pintle Hitch
The pintle is made by Wallace Forge.
I ordered the XDR online. it cost just under $200 shiopped to Oklahoma. It was from etrailerpart.com |
Re: Pintle Hitch
Originally Posted by Prater
OK, I now have the XDR on but what is everyone doing for their plug? I use my factory plug on different trailers and there is no where to attach it to the XDR.
|
Re: Pintle Hitch
Originally Posted by Prater
The pintle is made by Wallace Forge.
I ordered the XDR online. it cost just under $200 shiopped to Oklahoma. It was from etrailerpart.com |
Re: Pintle Hitch
birdog,
It took about 10 minutes to pull the old one and install the new one with my thundergun. Really simple install. |
Re: Pintle Hitch
3 Attachment(s)
Here is the typical junk that peeps tow with that has to be re done heavy duty...this was on the back of this toter home we are going to take racing with the boys! :drink:
|
Re: Pintle Hitch
3 Attachment(s)
I can not believe people were using this reciever ....going to do a pintle with heavy reciever and air breaks...pintle to be 15 or 20 ton..all tied in to frame and also bolted..through frame rails.
|
Re: Pintle Hitch
3 Attachment(s)
lay out and rough
|
Re: Pintle Hitch
3 Attachment(s)
:fish: ....the start of the side drop plate to frame rail....bolted and some weld to frame......
|
Re: Pintle Hitch
3 Attachment(s)
:d
|
| All times are GMT -5. The time now is 04:08 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.