Offshoreonly.com - Pintle Hitch

Page 8 of 8

« First

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Trucks, Trailers and Transportation (https://www.offshoreonly.com/forums/trucks-trailers-transportation-159/)

- - Pintle Hitch (https://www.offshoreonly.com/forums/trucks-trailers-transportation/127274-pintle-hitch.html)

Byrdman

05-16-2006 10:09 PM

Re: Pintle Hitch

3 Attachment(s)

I cleaned up some od the welds so you guys do not think i am a bum......and I did not do any of this scab wiring....what a bunch of idiots...3/4 plate :D

Byrdman

05-16-2006 10:13 PM

Re: Pintle Hitch

3 Attachment(s)

If you take notice...i had to cheat my hitches over slightly to match the ball......when mine were in center of frame rails...they really looked bad....those original guys were bums...they were off almost 2 inches...

Byrdman

05-16-2006 10:21 PM

Re: Pintle Hitch

1 Attachment(s)

I am going to drag the air breaks back here....in 2 weeks....but this is a hitch...basically done right....dogs name is Rommel :evilb:

All times are GMT -5. The time now is 06:44 PM.

Page 8 of 8

« First

Show 40 post(s) from this thread on one page