Hitch Mounted Mud Flaps
#1
Registered
Thread Starter
Hitch Mounted Mud Flaps
Looking for something that fits a 2.5" hitch.
Found the following, any feedback?
Anyone use similar?
http://www.towtector.com/index.cfm/p...e=cat/cat7.htm
Found the following, any feedback?
Anyone use similar?
http://www.towtector.com/index.cfm/p...e=cat/cat7.htm
#3
Registered
Thread Starter
Any others?
#4
Registered
The Rock Tamers are now offered in 2.5". You can call and order them direct since they aren't in stores yet. I got mine in November. I called them at least once a year since 2008 asking for 2.5" mounts... They finally offer them but as you said, they don't cover as well as the bristles. I went with them anyways since I figured the bristles would always look dirty.
#5
Registered
Thread Starter
The Rock Tamers are now offered in 2.5". You can call and order them direct since they aren't in stores yet. I got mine in November. I called them at least once a year since 2008 asking for 2.5" mounts... They finally offer them but as you said, they don't cover as well as the bristles. I went with them anyways since I figured the bristles would always look dirty.
Let's see what others think.
#7
I have a set of Rock Tamers that were setup for my SRW truck. I'd say they work well, but they are a giant heavy awkward PITA to keep around, install, and store.
I have the molded mudflaps on my DRW truck now, and extended them a bit lower with another mudflap attached inside of them. I'll probably replace them with something else this spring though.
I have the molded mudflaps on my DRW truck now, and extended them a bit lower with another mudflap attached inside of them. I'll probably replace them with something else this spring though.
#8
Registered
That was my next plan if they didn't get with the times and update to the 2.5" drawbars... My biggest problem was the stock exhaust on my 2008 Silverado. I needed to pull my new boat back from Northern Michigan in November so I had to hurry up and modify the right side flap. Since then, I changed the exhaust to 4" MBRP Stainless that exits more out the side. The replacement flap for the one I hacked up is about $30.
#9
Registered
Join Date: Nov 2008
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
Looking for something that fits a 2.5" hitch.
Found the following, any feedback?
Anyone use similar?
http://www.towtector.com/index.cfm/p...e=cat/cat7.htm
Found the following, any feedback?
Anyone use similar?
http://www.towtector.com/index.cfm/p...e=cat/cat7.htm