32' coming soon
11-14-2007, 06:41 PM
#17
Banned
Join Date: Dec 2003
Location: st. louis,mo.
Posts: 1,647
Likes: 0
Received 0 Likes
on
0 Posts
very nice boats, just a few comments-- the recessed line in the side towards the back is out of place, no purpose, what is the extension knotch at the back of the bustle for. the raised portion on the deck looks like the older catamarans ,would look better with a flat deck area between the sponsons, maybe with a naca duct before the area that raises to the windshield, the front of the tunnel and angles connectioning to sponsons is too thick, looks and more aerodynamics if thinner, just comments from midwest catamaran lovers, have you thought about laying it up with Tegris composite material, awesome product,
11-27-2007, 06:31 PM
#18
Registered
Thread Starter
Join Date: Dec 2006
Location: san diego
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the great feed back on the project. The best way to talk about all the tricks on this boat is to remmber we are building these per order. Basicly if someone wanted to smooth it out we can do that. The area between the hatch is set to have custom billet steps that insert into the slots. But once again if someone wanted it smooth we can remove them and give a smooth center. The spot that looks thick can even infact be cut back if requested we gave room for the riggers to have access. the trick comes in the rear we have custom retractable lader on the back.
