Propeller for 280
 

What is the best prop for a 280 with a 540 600hp? What is everyone seeing for prop slipage?

Re: Propeller for 280
 

I would call Mike at Hall propeller. He is a genuis at working Velocity Props. I am running a labbed 26 Hydro but with a mostly stock 502 mag. what are you running now?

Re: Propeller for 280
 

28p Hydro @ 5400 rpm would like to try a bravo one 4-blade I have too much slippage and cavitation

Re: Propeller for 280
 

On my 26 Thoroughbred, I'm running a Halls labbed Bravo 30". My slip numbers are still a little high, but the midrange is better than my old Hydro. Also, I like the handling much better with the Bravo. I think I gave up a little speed, but it was worth it. I tried a new (unlabbed) 26" Hydromotve Q5X five-blade, (borrowed), and it was NICE! Picked up some serious mid (3500 rpms/50mph) and felt really good. That's my next prop for sure. Slip as down to around 10-12%, too.

Jim

Re: Propeller for 280
 

bglz42 What H.P are you running . Also what top speed did you see with 5 blade .

Re: Propeller for 280
 

I have a '96 280 with 540 and a little over 600 hp and run a labbed 30 bravo by Mike Hall. He says I really should use a 32, but don't have the extra money. I have turned the prop as high as 5600 rpm at about 83 on gps. Hit a little sand bar here at Havasu and took some of the edge off and down to around 5400. My mid range is awsome...I can accelerate as fast as a lot of blown boats.

Re: Propeller for 280
 

30 lab all the way...

Re: Propeller for 280
 

I had a 280 with HP500 and B&M Blower approx 650Hp.
With 30P Bravo 1 rode too flat and 85 MPH
With 29 labbed hydro totally different attitude and 88 MPH.
I recommend the hydro labbed hands down. I did not like the Bravo at all!

Re: Propeller for 280
 

i run a 32labbed bravo turn it right at 6000 but i thank it runs to flat may let mike do some work on it for next summer i also wont to try a 5 blade

Re: Propeller for 280
 

what kind of speed should a 280 (1996) with a merc 500 carb see?