1980 30' Velocity - Redo in progress
11-22-2012 | 05:01 PM
#71
Registered
Joined: Aug 2005
Posts: 599
Likes: 26
From: Coshocton, Ohio
Thanks
Now that it's getting winter and I'm stuck up north this year for most of it I"ll try to get the site up to date while it's snowing. Pulling motors to fix a nagging oil leak this winter and check-up. I just like them sitting in the shop better than in the weather.
Now that it's getting winter and I'm stuck up north this year for most of it I"ll try to get the site up to date while it's snowing. Pulling motors to fix a nagging oil leak this winter and check-up. I just like them sitting in the shop better than in the weather.
Last edited by Underdog88; 11-22-2012 at 05:03 PM.
11-28-2012 | 12:42 PM
#72
Driver-441
Joined: Aug 2004
Posts: 12,011
Likes: 1,511
From: Lake George
Our Cobra had them originally...Im sure yours will be better. These weighed a ton, we used them as a mold and built a real light cored glass one. Boat looks great awesome job!
12-22-2012 | 07:15 PM
#73
Thread Starter
Registered
Joined: Nov 2005
Posts: 312
Likes: 5
From: Avon, OH
Movement....XT Innovations has her.
The guys over at XT Innovations are in possession of her. Starting with fitting the dash and back seat along with custom bolsters. Now it comes down to how far I can go before the $$$ runs out!
Also received my custom Lightning headers. They are dry to the tip. Should be loud! They really look nice. I've collected MSD Digital 6 Plus ignition boxes, billet alum coils, Bravo 1 Props, etc...
Also received my custom Lightning headers. They are dry to the tip. Should be loud! They really look nice. I've collected MSD Digital 6 Plus ignition boxes, billet alum coils, Bravo 1 Props, etc...
Last edited by ttrm007; 12-22-2012 at 07:16 PM. Reason: typo
12-22-2012 | 07:40 PM
#74
Thread Starter
Registered
Joined: Nov 2005
Posts: 312
Likes: 5
From: Avon, OH
Velocity 100 Logos?
Dave already has these over at XT Innovations but here is what I was thinking. This hull was the first vee to break the 100mph barrier in 1979. To be clear, I'm not suggesting it was this actual boat, but Steve Stepp designed this hull and broke it before selling mine in 1980 so it wasn't too far from the original.
I also don't think I will ever hit 100mph, more like 80 but who knows. I've found some pretty stout 650hp small blocks I'm building now and after seeing how fast Still Crazy goes, you never can tell.
I was thinking it would be a cool tribute and a historic reminder about the Velocity tradition to put this logo on the rear of the bolster seats. What do you guys think?
If so, black lettering or outline for the 100?
I also don't think I will ever hit 100mph, more like 80 but who knows. I've found some pretty stout 650hp small blocks I'm building now and after seeing how fast Still Crazy goes, you never can tell.
I was thinking it would be a cool tribute and a historic reminder about the Velocity tradition to put this logo on the rear of the bolster seats. What do you guys think?
If so, black lettering or outline for the 100?
02-09-2013 | 09:29 AM
#76
Thread Starter
Registered
Joined: Nov 2005
Posts: 312
Likes: 5
From: Avon, OH
Progress - Headers and Bolsters
Dad and I got the headers fitted. Still haven't cut the 6" holes in transom. Yeah, 6 INCH. A little stressful.
The guys at XT Innovations got the bolsters together. They look awesome.
The guys at XT Innovations got the bolsters together. They look awesome.
