Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Velocity (https://www.offshoreonly.com/forums/velocity-40/)
-   -   Realisticly (https://www.offshoreonly.com/forums/velocity/182453-realisticly.html)

Single Screw 32 04-06-2008 01:24 PM

Yes i would have to agree a set of mild blowers with good gas and a little common sense should make 500 to 600 horse depending on the kit and tune. dropping $20 to $50 grand on used / low hour motors would make me scratch my head alittle. With you living in OK the drives should hold up i would think( We boated on Lake Eufaula and a 6" chop is a rough day LOL) Good luck. Curt

Velocity Vector 04-06-2008 05:40 PM


Originally Posted by Single Screw 32 (Post 2515060)
Yes i would have to agree a set of mild blowers with good gas and a little common sense should make 500 to 600 horse depending on the kit and tune. dropping $20 to $50 grand on used / low hour motors would make me scratch my head alittle. With you living in OK the drives should hold up i would think( We boated on Lake Eufaula and a 6" chop is a rough day LOL) Good luck. Curt

Curt, I just got back from the lake, I was heading up to the 80MPH mark on my GPS @ 4950 RPM and the port engine took a sh!t, I saw my oil pressure gauge go from 50psi to 15psi then a good knock from the engine bay put me on the trailer. Motor still runs strong but oil pressure not over 15PSI so I'm thinking a spun a main bearing the way it knocks.

Velocity Vector 04-06-2008 05:51 PM


Originally Posted by DKerns (Post 2514781)
VV, I hear that you need about 20 mph and a bigger pair of balls.............:hitfan:

Honestly, the Blue motors are the way to go! You will be much happier in the long run!. Good luck with your search!

I think so too, Even more since I spun a main bearing today. I'm on the trailer now.:hitfan:

Andy 04-06-2008 06:32 PM

That fukcing stinks. Sorry to hear that. Been there, only good thing its early in the season. When you put it away last season was everything ok? Was there fresh oil in before your blast, or is this a good way to tell your sweety, it wasn't my fault and now I need a rebuild and might as well include blowers. Also been there.

Andy 04-06-2008 06:36 PM

I'm not an a$$ hole, didn't mean to leave on of those smiley faces (icon) cause you blew up, it was cause I thought I was funny about the blower remark. Andy...

Velocity Vector 04-06-2008 06:42 PM


Originally Posted by Andy (Post 2515379)
That fukcing stinks. Sorry to hear that. Been there, only good thing its early in the season. When you put it away last season was everything ok? Was there fresh oil in before your blast, or is this a good way to tell your sweety, it wasn't my fault and now I need a rebuild and might as well include blowers. Also been there.

Andy I just changed every fluid the motors and drives had and I didn't even hit the rev limiters. Just going for the top end numbers and all the sudden the oil pressure droped and the knocking started. I was still running hard but 15 psi from 50 and the dreaded knocking noise we all hate to here. First time out this year ". "Bummer" I was hoping to get thru the season before the swap but no luck. Everything on the gauges worked, water pressure was good 30psi, water temp 160, oil temp did get to 260 after the bearing spun but was 230 before. Very happy with the gauges. I'm still searching for blues. The wife knows that sound, She said, "You just sh!t a motor!!" Hee!

Velocity Vector 04-06-2008 07:06 PM


Originally Posted by Andy (Post 2515388)
I'm not an a$$ hole, didn't mean to leave on of those smiley faces (icon) cause you blew up, it was cause I thought I was funny about the blower remark. Andy...

I didn't even see that a$$hole.

DKerns 04-06-2008 07:51 PM

Well that sucks!! Atleast it happened before you dumped money into blowers and upgrades. Good luck on your search for the "blue" motors.

1HYPER1 04-06-2008 08:37 PM


Originally Posted by Velocity Vector (Post 2515308)
Curt, I just got back from the lake, I was heading up to the 80MPH mark on my GPS @ 4950 RPM and the port engine took a sh!t, I saw my oil pressure gauge go from 50psi to 15psi then a good knock from the engine bay put me on the trailer. Motor still runs strong but oil pressure not over 15PSI so I'm thinking a spun a main bearing the way it knocks.

That Fn blows,let us know what happend and if we can be of any assistance.:(

Velocity Vector 04-06-2008 09:07 PM


Originally Posted by DKerns (Post 2515479)
Well that sucks!! Atleast it happened before you dumped money into blowers and upgrades. Good luck on your search for the "blue" motors.

Thanks D, Yesterday I had my engine hatch open looking at the 496's and I said out loud I wish you were blue 500's. I guess the 496's heard me.


All times are GMT -5. The time now is 07:41 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.