There's a Mouse in the house
#33
Registered
Thread Starter
Join Date: Feb 2003
Location: Middletown, DE
Posts: 340
Likes: 0
Received 0 Likes
on
0 Posts
Oh, I have a set of Keikafer (sp) shiffter and throttle with trim switch. White powder coat. Let know if you need any details. I'm sure this would also help control her.
As for the foot throttle, I had a Land n Sea which had a link in it, so you could attach a hand throttle to it. So thats how i had both.
It was great for rippin with the foot and then cruisen with then hand throttle. I didn't work to well when hand throttling in the rough water.
Call me if you need any details cell 732-904-2289
As for the foot throttle, I had a Land n Sea which had a link in it, so you could attach a hand throttle to it. So thats how i had both.
It was great for rippin with the foot and then cruisen with then hand throttle. I didn't work to well when hand throttling in the rough water.
Call me if you need any details cell 732-904-2289
#35
Registered
Thread Starter
Join Date: Feb 2003
Location: Middletown, DE
Posts: 340
Likes: 0
Received 0 Likes
on
0 Posts
That didn't make sence. Bill asked me what kind of foot throttle i had in the 22. I had a land n sea linked to the marine machine throttle set up. Cables went from hand to foot to motor.
Fishen for compliments
Fishen for compliments
#36
Registered
Join Date: Aug 2005
Location: Marietta, Ga.
Posts: 777
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Vicious. I will be in touch over the weekend. And Bill is the man! Talk about going above and beyond to help a guy out and get info!!!
Velocity Vector, how did you make out on those steering rams!?!?!
Velocity Vector, how did you make out on those steering rams!?!?!
Last edited by DKerns; 10-11-2008 at 12:12 AM.
#38
Registered
Join Date: Sep 2006
Location: NJ
Posts: 211
Likes: 0
Received 0 Likes
on
0 Posts
#39
Registered
Join Date: Aug 2005
Location: Marietta, Ga.
Posts: 777
Likes: 0
Received 0 Likes
on
0 Posts
Well gentlemen, I have decided on the Bravo. I have started gathering parts with a special thanks to Velocity Vector!!
I will be working on it throughout the winter and would like to have it ready in the spring. I will post pics of the progress!! The motor should be back out in a couple of weeks for some minor upgrades and some "bling"!!