Bad Memorial day
 

Here are some pics from about 45 minuets after my boat broke down and some from this afternoon after I pulled the heads off. The motor is a mercury racing 500 bulldog and I was wondering where the best place to get a new block would be I am also having some trouble finding out if the block is a 502 or a 454 talldeck any help would be great

I thought the bulldog 500 hp was 540ci

that's right... HP 500 = 502 c.i. at 470 hp

Bulldog are 540 c.i rated also 470 hp or 500 hp I can't recall

YEP,,,and i don't think this would be a thin wall like that either on a talldeck /Bulldog Block ?????

Some thing is not right !!:party-smiley-004:

Looks like a over bored standart deck 454/502 to me ?!:eek:

Can u post a picture of the front of the block ?????

That way i can see what it is ?! maybe ?! LOL

Front Of Block
 

I dont know if you can tell from this pic if not let me know and I will get some more tommarrow also ran the number stamped on the block and it says it is a 454t block

YEP,,454 talldeck bowtie ( truckblock )

U can find one for around 3000 + if u are lucky !!!!:eek:

Call this guy , STEVE 954 240 1074 !!!

I know he has some of them ,,but don't know if he is willing to sell !!

They are hard to find !

( u can tell by the little oiler tube in front above the WP ),,the one with the allen plug in there !

You can quickly identify it at the upper waterpump bolts. On a shorty, the distance from the upper waterpump bolt to the deck of the cylinders will by ~0.200", and the tall deck is ~0.600", The difference is 0.400"

The tall motors have longer rods, which produce more torque - not noted for revs. Pushrods are also longer.

I don't think the 454 was ever offered in a tall deck - the 366 and the 427 were offered both ways, but I think the 454 and all later Mark IV blocks are all short deck, but not sure.

I have a friend with 2 502 bowtie tall deck blocks if that helps you out. If you need them shoot me a pm.

Frank

I have some stuff coming off the dyno next week that you might be interested in that would be turn key, and priced right. I am up in Conroe. Engines are down at Owens right now. PM me if you are interested. I can tell from the pics that your rigging would work fine on them.