Looks good Bob! On ours, we have 3 facing forward and 1 rearward (on each side of the boat) just so there isn't too much pressure. As it is, we already have issues with fumes getting pressurized into the cabin from the bilge.

Also, your fuel pumps are back and rebuilt from MagnaFuel! :D

Thanks Jason. We will take care of that, I'll get in touch with Dennis. I might add 1 more per side and the hatches have relieves in the rear.

Well.....I'm just concerned that when you lean on the sticks those beasts will suck you back seat out.:)

Oh, and I want to win the contest (from 10 pages ago) so you better need 6.

Radio the CG ---- call the search off, ---- I found her!





[ATTACH=CONFIG]520155[/ATTACH]

Update..... Finally, after 6 months RCD came through and we received the Snout cupplers..... Also received 2 new factory rebuilt Megnafuel fuel pumps and filters, and regulators. Getting very close now.[ATTACH=CONFIG]520762[/ATTACH][ATTACH=CONFIG]520763[/ATTACH][ATTACH=CONFIG]520764[/ATTACH][ATTACH=CONFIG]520765[/ATTACH][ATTACH=CONFIG]520766[/ATTACH][ATTACH=CONFIG]520767[/ATTACH][ATTACH=CONFIG]520768[/ATTACH]

Regulators should be there soon, they got shipped on Friday. Dennis also included the hoses we used that went from the regulators to the carbs just in case there were a few that might be the right size.

Thanks Jason.

I'd set the regulators @ 5 gal/min to start :) Then bring it on up.

Picked these up from powder coater on Sunday. Turned out nice.[ATTACH=CONFIG]520988[/ATTACH][ATTACH=CONFIG]520989[/ATTACH][ATTACH=CONFIG]520990[/ATTACH][ATTACH=CONFIG]520991[/ATTACH]