Trs Drives
03-25-2008, 06:50 AM
#2
Registered
ive got 3 uppers, (400each) and one entire drive that needs work.
For sure it needs a paint job which is easy, but it also has a mechanical problem. I have no idea what is wrong with it as it was loaded into my truck by the guy i bought my formula from. He said he knew it didnt work but wasnt sure why, and i never touched it sinse i unloaded it.... But its yours as well for 500$
for all i know it might work, or be some 12$ part.. But im selling it priced to expect the worst and maybe you will make out!
For sure it needs a paint job which is easy, but it also has a mechanical problem. I have no idea what is wrong with it as it was loaded into my truck by the guy i bought my formula from. He said he knew it didnt work but wasnt sure why, and i never touched it sinse i unloaded it.... But its yours as well for 500$
for all i know it might work, or be some 12$ part.. But im selling it priced to expect the worst and maybe you will make out!
Last edited by Boomer35; 03-25-2008 at 08:24 AM.
Platinum Member
03-25-2008, 09:12 AM
#4
Registered
Join Date: Apr 2002
Location: Lake of the Ozarks
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
There are two here, that blong to someone else for sale off of a boat that had burned, The curved part of the back of the upper case on one shows some corrosion that appears to have been attempted to been fixed, can't speak on the interneals without tearing em down, I'll check with him on cost e mail me if interested and i'll see if i can get a pic to you. [email protected]
03-27-2008, 01:33 AM
#7
Registered
I have a pair of freshly redone TRS Speedmaster II's, basically a vented TRS upper with a Speedmaster bullet lower. They will bolt up to a TRS gimbal. The drives were just completely freshened. They are being completely refinished cosmetically as we speak, stripped bare, epoxy primed and faired out and shot with PPG enamel gloss black on the uppers and satin silver on the lowers. I also have a set of Speedmaster Cleaver counter rotating props for them.
Harry
[email protected]
Harry
[email protected]
03-30-2008, 02:43 PM
#8
Registered
Gold MemberJoin Date: Oct 2003
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
I Have one Complete Drive with nosecone Also 1 upper drice both perfact 3 Borg warner transmisions 3 Complete Gimbles
6 or 8 trim rams 2 complete aluminum bell housings with built in oil coolers with top mount starters also 2 starters2 nirise aluminum intacks big block chevy $ss Props & moer
just taking up space Sell All $ 2000.00
Call Tony
727-647-0121 Pick up only
6 or 8 trim rams 2 complete aluminum bell housings with built in oil coolers with top mount starters also 2 starters2 nirise aluminum intacks big block chevy $ss Props & moer
just taking up space Sell All $ 2000.00
Call Tony
727-647-0121 Pick up only
Thread
Thread Starter
Forum
Replies
Last Post
Dean Ferry
General Boating Discussion
4
11-27-2002 08:09 AM
