(2) 1050 dom carbs and 2 std deck intakes.......
02-02-2011 | 10:06 AM
#11
Gold Member
Joined: May 2002
Posts: 1,127
Likes: 0
From: DFW
We have a set of 1050's and a set of tall deck (10.2") Wilson intakes, w/turtles, ported and polished. Exterior is mill finish Aluminum. There are more pcs. to the package, though not sure what they are. The parts are in box's under other box's.
Subject to your interest, we will move those box's around. The books show we have $3008.00 in those parts.
BTW, The intakes were sent to Wilson for installation of steam bungs at the rear of the intake. They are still in the box's.
These intakes will work on your short deck w/shims. Your distributor shaft may be short, unless it is adjustable. These intakes will probably flow much better than a short deck intake. Some tuners prefer to use a tall deck manifold w/shims on a short deck. Hatch clearance would be the only concern.
Subject to your interest, we will move those box's around. The books show we have $3008.00 in those parts.
BTW, The intakes were sent to Wilson for installation of steam bungs at the rear of the intake. They are still in the box's.
These intakes will work on your short deck w/shims. Your distributor shaft may be short, unless it is adjustable. These intakes will probably flow much better than a short deck intake. Some tuners prefer to use a tall deck manifold w/shims on a short deck. Hatch clearance would be the only concern.
Sorry for the confusion.
