BBC intakes and carbs
#14
Registered
Join Date: Aug 2012
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
#16
#17
Registered
iTrader: (1)
I am working on a Baja 280 Sport. Complete rebuild of port motor and freshening the top end on the starboard motor. It has two 454 mags that I am running completely stock (cam included) with the only add on being EMI exhaust with the short risers and the rebuilt motor being .30 over on the pistons (starboard motor is still standard bore). Both intakes and carbs have severe corrosion so I am looking for two intakes and carbs to replace them. I am a newbie here so even if you have suggestions of what would work well on this set up I would appreciate the advice. Thanks!!!
#18
Registered
Have Two Rochester 4M (Quadrajet) Marine Application Carburetors
MCM/MIE 228, 230, 260, 330, 340 w/305", 350", 454"
professionally rebuilt to original spec's half a season before taken off.
Here is a picture of one with the rebuild tag still attached.
Some reason this page wont hot link so here is the address.
http://www.supernova19.com/resurrectionmarine/07988670.jpg
More for sale here ...
http://www.supernova19.com/resurrectionmarine/parts_for_sale.htm
And depending what part of Del you are in we may be able to drop off or meet.
MCM/MIE 228, 230, 260, 330, 340 w/305", 350", 454"
professionally rebuilt to original spec's half a season before taken off.
Here is a picture of one with the rebuild tag still attached.
Some reason this page wont hot link so here is the address.
http://www.supernova19.com/resurrectionmarine/07988670.jpg
More for sale here ...
http://www.supernova19.com/resurrectionmarine/parts_for_sale.htm
And depending what part of Del you are in we may be able to drop off or meet.
Last edited by f_inscreenname; 02-15-2013 at 03:34 PM.