0LikesBravo gimble ring or transom assembly
04-15-2018, 03:14 PM
#1
Registered
Thread Starter
Join Date: Mar 2014
Location: Pittsburgh, PA
My Boat: '87 Donzi 22 2+3, '89 Formula 242LS
Posts: 298
Bravo gimble ring or transom assembly
My humble ring is worn and needs replaced. I would see if anyone has a good gimble ring or a transom assembly for sale
04-15-2018, 05:35 PM
#2
Registered
iTrader: (1)
Join Date: Nov 2009
Location: KY
My Boat: 94 Formula 27PC, 95 232 Rinker 454
Posts: 1,797
Have a transom assembly removed from my 1994 cruiser during rebuild which happened in 2015. Its a fresh water assembly, and some years back before rebuild I had the ring rebuilt and installed a new pin. When replacing the pin I used the Merc method and drilled and tapped holes on the side. Taking a WAG think I replaced the ring in 2010. Pic below is before it was removed and right after. Can take other pics, and have removed the cylinders and lower manifolds. Will take $300 plus ship and I'm in KY
04-15-2018, 06:06 PM
#5
Registered
Thread Starter
Join Date: Mar 2014
Location: Pittsburgh, PA
My Boat: '87 Donzi 22 2+3, '89 Formula 242LS
Posts: 298
Maybe try email at [email protected]. also if you have time give me a call so we can iron out the details
«
Previous Thread
|
Next Thread
»
Linear Mode
