I have short hub sets of 25 and 26 3 blade. Might have a set of 24 3-blade if my memory serves me. (in a box on the high shelves, so I didn't look unless you're interested) I think my bronze spacers were "borrowed" and never made it back home. Easy to fab. Let me know! All are 16.5 or there abouts.

So I can just have some spacers machined and use the short hub? If so then for sure if you can confirm what all you have would be great. I want to turn 6k min so the 24’s or 25’s would likely work or be closer than my 16 3/4 X 27’s.

Tks very much and and look forward to your response!

john

I have a set of 16 1/8 x 23 4 blades long hub if interested Regards Dan 949-646-9778

will text today.
tks

Ttt

I have a set of props from a speedmasster 2 that are 3 blade, 15x24. Right and left hand with the shaft spacers, I also have the lower units if you need any parts