trade -2 for std length imco
#1
Charter Member #1472
Charter Member
Thread Starter
trade -2 for std length imco
i have a -2 that i'm looking to swap for a std length. this is a 1.50 ratio imco. i would trade for a 1.36 or 1.50. 1 1/4" prop shaft on mine.
#3
Platinum Member
Platinum Member
iTrader: (6)
is that an IMCO or sport master
#5
Platinum Member
Platinum Member
iTrader: (6)
with the long skeg and lack of crescent shape looks like a sport master to me..it would have -2 stamped in the front machines surface if its an imco attached is an IMCO
#6
Charter Member #1472
Charter Member
Thread Starter
the upper case covers the front of the lower, i tried to look with a flashlight to see. i was thinking that maybe it was an older imco cause like you said with the lack of the crescent. yes the skeg is long on it. it just has the low water pickup on it. it has the blue carrier on the prop shaft. not trying to mislead anyone, the ad said XR upper, IMCO lower, but it was also supposed to be std length. but it's not. it works, the oil is clean, nothing on the magnet. i bought it, put it on and prop blows out when i almost get on plane, as soon as it starts to get there.
#7
Platinum Member
Platinum Member
iTrader: (6)
not trying to high jack your thread.....
The following users liked this post:
adrenalinejunkey (10-05-2021)