i have a -2 that i'm looking to swap for a std length. this is a 1.50 ratio imco. i would trade for a 1.36 or 1.50. 1 1/4" prop shaft on mine.

just looking to trade lower half. i was going to buy a spacer but maybe someone wants a shorty and has a std length.

is that an IMCO or sport master

it's supposed to be an IMCO, i don't see any markings on it.

with the long skeg and lack of crescent shape looks like a sport master to me..it would have -2 stamped in the front machines surface if its an imco attached is an IMCO

the upper case covers the front of the lower, i tried to look with a flashlight to see. i was thinking that maybe it was an older imco cause like you said with the lack of the crescent. yes the skeg is long on it. it just has the low water pickup on it. it has the blue carrier on the prop shaft. not trying to mislead anyone, the ad said XR upper, IMCO lower, but it was also supposed to be std length. but it's not. it works, the oil is clean, nothing on the magnet. i bought it, put it on and prop blows out when i almost get on plane, as soon as it starts to get there.

not trying to high jack your thread.....

no, i'm ok with that. information is always good. thank you, Dave

I have a standard length Sportmaster that was just rebuilt with 0 hours that I’ll trade for your -2 Sportmaster. Call or text me if you’re interested.
508-631-4784

The lower the op posted is a sportmaster