Class Rules for A-Class in mid-1990's?
09-09-2004, 06:15 PM
#1
Registered
Thread Starter
Join Date: Jan 2004
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Class Rules for A-Class in mid-1990's?
Does anyone recall what the class rules were for an APBA "A-class" boat back around 1994 or 1995?
I believe this would be a single engine boat, with a max displacement of 468 cubic inches?
Were there any restrictions on boat length?
Thanks,
Steve
I believe this would be a single engine boat, with a max displacement of 468 cubic inches?
Were there any restrictions on boat length?
Thanks,
Steve
09-09-2004, 06:38 PM
#2
Registered
Join Date: Mar 2001
Location: st. clair shores mi ,us
Posts: 1,620
Likes: 0
Received 0 Likes
on
0 Posts
Re: Class Rules for A-Class in mid-1990's?
I think the 468 ci motors could have 12.5:1 cr and then you could run a 509 with 10.1
I think the max length was 30 ft.
I think the max length was 30 ft.
09-09-2004, 09:16 PM
#3
Registered
iTrader: (4)
Re: Class Rules for A-Class in mid-1990's?
Max length I believe also is 30' NON-STEPPED HULL. 24 min.
I think there is also min boat weight. I believe that with every foot in length there is a 200 lb addition min weght.
24' 4000 lb
26' 4400 lb
28' 4800 lb
30' 5200 lb
I think there is also min boat weight. I believe that with every foot in length there is a 200 lb addition min weght.
24' 4000 lb
26' 4400 lb
28' 4800 lb
30' 5200 lb
Last edited by Rookie; 09-09-2004 at 09:24 PM.
Thread
Thread Starter
Forum
Replies
Last Post
AugiePensa
OPA/The Jersey Boyz
5
07-21-2007 04:51 AM
