35 ex theoretically
#51
Registered
I never had the blower motor's on a dyno so I don't know , The boat used to have B1's on it and the drive gears would break every time I got to around 92 so I replaced the drives .
Last edited by green lightning; 10-01-2015 at 04:03 PM.
#52
Registered
Thread Starter
got it home, BARELY. lost a wheel on the way down there at some point... going to cut into it sometime this week and where what i have to work with. should be a fun, but itchy project. decided to strip the cabin out and make it a strictly business fun little boat.
#54
Gold Member
Gold Member
Interesting project, will keep an eye on this one!
What happened to the bow? Was it driven up onto rocks? Hit another boat? Poor thing nearly lost 4' looking at the crack from the gunnel down to the bottom. Maybe when you're doing the fiberglass work you could extend the beak and make it a 38'?
RR
What happened to the bow? Was it driven up onto rocks? Hit another boat? Poor thing nearly lost 4' looking at the crack from the gunnel down to the bottom. Maybe when you're doing the fiberglass work you could extend the beak and make it a 38'?
RR
#55
Registered
iTrader: (1)
I would like to know that when you fix this, will the prior damage be disclosed and shown to the buyer ? I can't imagine thinking og buying something that had this previous damage, but I know we are all different.
#57
Registered
Thread Starter
SB... I don't plan on selling it. I know once it's fixed it'll be good as new. if I do sell it of course the buyer would know the history. And aka, the other side looks the same boat ran up into a marsh is the story I got. Ran high and dry on line so it was never sunk. I don't want to make it a 38 I want to keep it a 35
#58
Gold Member
Gold Member
iTrader: (5)
Join Date: Oct 2005
Location: Olmsted Falls,Ohio Marblehead,Oh
Posts: 11,634
Likes: 0
Received 204 Likes
on
132 Posts
I only know one person that I would even think of trusting to fix that much damage, especially if you wanna run over 100mph in it.... not trying to be a dik this time but that's some serious work there for a guys with LOTS of experience...
#60
Registered
Thread Starter
I guess when it's done you'll just have to come for a ride then huh Timmy?