Loud Exhaust
#1
Registered
Thread Starter
Join Date: Mar 2002
Location: Brandon, MS.
Posts: 1,135
Likes: 0
Received 0 Likes
on
0 Posts
Loud Exhaust
I was wondering what all could be done to make the exhaust louder on my 97 Hammer. Anything cheap and possibly something I can do myself would be what I'm looking for
#3
Registered
Thread Starter
Join Date: Mar 2002
Location: Brandon, MS.
Posts: 1,135
Likes: 0
Received 0 Likes
on
0 Posts
Pantera24-650HP - thats what I'm looking for my friend. I see the plate you are talking about...question is how would you recommend doing it? Sounds like you have experience doing it. I know I'll tear something up...so any suggestions will help
#7
Registered
Thread Starter
Join Date: Mar 2002
Location: Brandon, MS.
Posts: 1,135
Likes: 0
Received 0 Likes
on
0 Posts
I might end up doing that. More then likely it'll be too much of a pain to knock out the plate.....$145 is not too bad...plus the tips will look sweet. Any idea where you guys picked up the tips?
#8
i saw tredwell motor sports had some for sale in the class, The last set were from cp performance . shop around some of the dealers in hot Boat and Powerboat. make sure they have the rebuildible flappers inside.do a search on tips , you might find someone that just put headers on . make sure on size.
Rob
http://www.offshoreonly.com/forums/s...threadid=54844
http://www.eddiemarine.com/cart/deta...&CategoryID=30
each
Rob
http://www.offshoreonly.com/forums/s...threadid=54844
http://www.eddiemarine.com/cart/deta...&CategoryID=30
each
Last edited by Strip Poker 388; 07-22-2003 at 05:24 PM.
#9
Guest
Posts: n/a
Originally posted by Strip Poker 388
You prob have the corsa tips , afriend of mine had them on a scarab and we just replaced the tip with some straight thru type ,it made a lot of difference .the tipps where about 145.00 .
You prob have the corsa tips , afriend of mine had them on a scarab and we just replaced the tip with some straight thru type ,it made a lot of difference .the tipps where about 145.00 .
#10
Registered
Thread Starter
Join Date: Mar 2002
Location: Brandon, MS.
Posts: 1,135
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the link Rob. I'm trying to pick up those tips...assuming they have internal flappers and they'll fit my hammer. If not I'll just buy a set later.....I've pretty much ruled out cutting them. Are they pretty easy to install? I've never done it so I don't have a clue.