Shorty Lower on a Savage
#11
Registered
Joined: Sep 2004
Posts: 253
Likes: 0
From: Rockford Mich
Boatfreak,
You state you are running a LH prop. Did you install this, and if so did you have to re arrange any weight and do you have to run tabs to correct any prop torque?
You state you are running a LH prop. Did you install this, and if so did you have to re arrange any weight and do you have to run tabs to correct any prop torque?
#13
Originally Posted by michigan troll
Boatfreak,
You state you are running a LH prop. Did you install this, and if so did you have to re arrange any weight and do you have to run tabs to correct any prop torque?
You state you are running a LH prop. Did you install this, and if so did you have to re arrange any weight and do you have to run tabs to correct any prop torque?
#14
Thread Starter
Registered
Joined: Nov 2004
Posts: 22
Likes: 0
From: New York
Thanks a lot guys it really helps getting so many different views. Also, Pat you probably know this boat best and giving me your cell phone # should put me in touch with you. As we all know we are always looking to go faster so thanks again all, And yes I do love the boat
Last edited by ghaskell; 09-28-2005 at 06:27 PM.
#15
Registered
Joined: Aug 2011
Posts: 289
Likes: 0
From: RI
Bringing back an old one from the past, but hoping some of you can chime in on what ended up working. I'm in the middle of these issues with setup on my 99. What spacers did you end up using or props? I am fastest with the drive buried in the water. 26P LH bravo one 5100 rpm at 69 mph. I know there is a ton left as I have a 548 producing 635 at 5700. Looking for direction to go, once I start getting this thing to hook up I also have a 28P LH bravo one to try as well.
Thread
Thread Starter
Forum
Replies
Last Post
raymo1979
Drives and Lower Units
0
05-04-2008 03:15 PM







