Anyone Know this 37AT
#1
Registered
Thread Starter
Join Date: May 2003
Location: Newburgh, NY
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
Anyone Know this 37AT
http://www.offshoreonly.com/esvon/page-9022.html
It seems like a good deal. New 500 Carbs etc. Pro's/Con's of this motor.
Thanks,
Derek
It seems like a good deal. New 500 Carbs etc. Pro's/Con's of this motor.
Thanks,
Derek
#2
Re: Anyone Know this 37AT
Originally Posted by derekdeben
http://www.offshoreonly.com/esvon/page-9022.html
It seems like a good deal. New 500 Carbs etc. Pro's/Con's of this motor.
Thanks,
Derek
It seems like a good deal. New 500 Carbs etc. Pro's/Con's of this motor.
Thanks,
Derek
Last edited by Sydwayz; 07-28-2006 at 01:33 PM.
#5
21 and 42 footers
Platinum Member
Re: Anyone Know this 37AT
Here I am,
Went to look at it before the motor were done. I'm picky so keep that in mind.
-Bottom has a number of chip and scraps that need to be addressed, I have also been told (can't verify) that the boat leans to one side below 3,500 rpms.
-Cockpit upholstry needs some cleaning and is torn on a number of corners, the sunpad is shot!
-Interior is very basic, no ammenities and seems dingy too.
I figuredit would take $25K to get it like I wanted......
Went to look at it before the motor were done. I'm picky so keep that in mind.
-Bottom has a number of chip and scraps that need to be addressed, I have also been told (can't verify) that the boat leans to one side below 3,500 rpms.
-Cockpit upholstry needs some cleaning and is torn on a number of corners, the sunpad is shot!
-Interior is very basic, no ammenities and seems dingy too.
I figuredit would take $25K to get it like I wanted......
#6
Registered
Thread Starter
Join Date: May 2003
Location: Newburgh, NY
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
Re: Anyone Know this 37AT
All.
Thanks for the input, I may just look at it for s&g's since I am in that area for business quite a bit. Thanks for the input, I will stay away from a purchase for sure.
Thanks for the input, I may just look at it for s&g's since I am in that area for business quite a bit. Thanks for the input, I will stay away from a purchase for sure.
Thread
Thread Starter
Forum
Replies
Last Post
ActiveThunder
Active Thunder
31
07-22-2008 07:09 PM