|
BTW you guys are very motivating. Looks like I'm going to get moving today instead of growing my azz on the couch watching football.
|
Originally Posted by Thunderstruck
(Post 2983374)
BTW you guys are very motivating. Looks like I'm going to get moving today instead of growing my azz on the couch watching football.
|
Originally Posted by Thunderstruck
(Post 2983361)
T What are the specs on your engines now? Can't remember. Should be a screamer.
But the leak numbers are at 2% to9% With these numbers im sure im going to keep the cylinders sealed up for another season. I will pull the cranks and do bearings for sure and have the cranks dbbl keyed for the blower hubs. I think im going to go back with solid cams and dry exhaust. Mooneyham 12/71 blowers with mag/teflon stripped rotors, boost retard boxes, 4 hp 950 blower carbs, offset ign system. This summer it would run 91 any time you push the throttles down. My wife said 93 but I wasnt looking at the gps that much. They were 625 hp. The new engines will be 850 hp. I hope to see 110 or 112. Im sure it will run out of boat before if will run out of power. I dont run them wide open all the time its just nice to know it will. No competion runs for me, just fun at the lake. |
Originally Posted by Thunderstruck
(Post 2982822)
Rick let us know how it goes. Interesting concept to put the little blowers on. Shouldn't take too much to make Audacity run in the upper 90's to 100.
i hope to see mid 90s , i think im going to need nose cones as well, as you did to get over 90. good luck with your rebuild. rick |
1 Attachment(s)
Well, OK so you guys ARE very motivating but I was demotivated to work on the boat.
I went fishing instead, 20 redfish, 60 speckled trout. Maybe I need some extra motivation guys. :evilb: |
Originally Posted by Thunderstruck
(Post 2982195)
Well it's the time of year to get going on some winter projects. It's hard to believe it's been 5 years since we upgraded the 500's to 600's. So, it's time for rings, bearings, valve springs, valve job, rebuild lifters, paint bilge and a ton of other stuff.
Worked for a while tonight but it was hot as heck in my shed. What are you guys doing for winter projects? Start with both motors in the boat, running OK BTW. |
Update
2 Attachment(s)
Update, the motors are out and ready for the upgrade, should be a fun winter.
|
las
Who's doing the work? Can't wait to see you run next year. Should be awsome. Have a great winter . Steve |
Originally Posted by NEVERSATISFIED
(Post 2985924)
las
Who's doing the work? Can't wait to see you run next year. Should be awsome. Have a great winter . Steve |
That should be a sweet ride love that boat.
|
| All times are GMT -5. The time now is 10:00 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.