|
Originally Posted by ICDEDPPL
(Post 3076280)
I think this would be a spring project now but check this out..
http://img.photobucket.com/albums/v4..._cleardiff.jpg This diff. cover just cracks me up.. the video is dark but the cover is 100% clear. Just cracks me up seeing the stuff go round:lolhit: I figure any water or moisture that gets in there I`ll be able to tell, along with how dirty it gets and the level.. I smacked a curb a couple months ago in a winter storm so I was in there changing the axle.. figured what the hell:evilb: |
2 Attachment(s)
Ready to go in.....
|
2 Attachment(s)
and it's in. Wiring, fuel system and headers tomorrow and it will be ready for the timing light at the ramp :grinser010:
|
Looks good Mark.
|
Got the drives on, filled with oil, steering on. Ran both motors on the hose in the driveway, fixed a couple of water leaks.
Ready for sea trials, set the timing etc. Anybody splash yet?? |
Originally Posted by ACTIVESHACK
(Post 3078388)
Ready to go in.....
|
Originally Posted by ACTIVESHACK
(Post 3078391)
and it's in. Wiring, fuel system and headers tomorrow and it will be ready for the timing light at the ramp :grinser010:
|
1 Attachment(s)
Originally Posted by Thunderstruck
(Post 3078434)
Got the drives on, filled with oil, steering on. Ran both motors on the hose in the driveway, fixed a couple of water leaks.
Ready for sea trials, set the timing etc. Anybody splash yet?? |
Originally Posted by rssteiny
(Post 3079031)
Wish i was that far, here is where i stand.
|
Originally Posted by blowntaylor
(Post 3079024)
Sweet!! Now I gotta get going on mine!! Headers: Water injected or water Jacketed like on the Actives? Looks like new heads too?:drink:
|
3 Attachment(s)
Ready for the timing light :grinser010:
|
3 Attachment(s)
A few more :drink:
|
Going to drag the Mastercraft out tomorrow put an impellor in it and charge the battery and have it in the lift by the weekend. 2 out of 3 in the water this week. Next will be a trip to Florida for OVERACTIVE :grinser010:
OK Sydwayz I don't want to read about any of this on Facebook either :lolhit: |
Don't blame me! It was my roommate!
|
Originally Posted by Sydwayz
(Post 3079222)
Don't blame me! It was my roommate!
At least this isn't a thread hijack because it has been a "winter project" getting rid of her :waffen093: |
Went on sea trials yesterday. Boat ran great! Small exhaust leak and some other minor junk. Now just need to put the engine hatch back on and hopefully use the boat some.
Bueller?? Bueller?? |
Oh and it looks like the battery went bad on the GPS antenna again. Weird because I think I changed that last year.
|
Originally Posted by ACTIVESHACK
(Post 3079355)
The blame should go to my ex-roomate because of her escapades :eek:
At least this isn't a thread hijack because it has been a "winter project" getting rid of her :waffen093: |
Originally Posted by Thunderstruck
(Post 3079099)
Are those coming out or going in??
|
After all the work I'm running around first pleasure cruise after shakedown, stop to talk to a buddy and one of my starters shats the bed. Just goes to show ya...
|
And get this, put a new battery in my GPS antenna and still didn't work. Call Livorsi and find out that they have to do some reprogramming along with the new battery and they don't do the battery change/reprogram service anymore. New antenna on the way. This one doesn't have a battery.
|
Bueller, Bueller?
|
1 Attachment(s)
Man I am so behind! I got the 850s done and started all over with a set of 1000s
Now its time to splash and I have one engine ready to install. The other block is still in the crate. I have everything to build it. Just have to get it to the machine shop for its first go around. I pulled the Sonic out of the garage and gave it a good going over. Im going to put it in tomorrow. Maby the Thunder will be sone soon. |
You thought 850's weren't going be enough in a 32????
850's should put the boat well into the triple digits. Probably 110mph or so and will be plenty to destroy the drives and leave stains in your shorts:eek::eek: |
Originally Posted by Griff
(Post 3089132)
You thought 850's weren't going be enough in a 32????
850's should put the boat well into the triple digits. Probably 110mph or so and will be plenty to destroy the drives and leave stains in your shorts:eek::eek: |
Originally Posted by tfarmer
(Post 3089014)
Man I am so behind! I got the 850s done and started all over with a set of 1000s
Now its time to splash and I have one engine ready to install. The other block is still in the crate. I have everything to build it. Just have to get it to the machine shop for its first go around. I pulled the Sonic out of the garage and gave it a good going over. Im going to put it in tomorrow. Maby the Thunder will be sone soon. |
Originally Posted by laszlo01
(Post 3089567)
Very nice, lots of HP for the 32, cant wait to see a video of it running. Should blow the bikini tops off the ladys. LOL
|
Quick question for the CULT. I'v noticed that some of you guys have a sleeve on your engine hatch actuator that is blue and has "active thunder" on it. I have finished all my projects as of today and thought that would be a nice finishing touch.
|
Originally Posted by flenner
(Post 3089705)
Quick question for the CULT. I'v noticed that some of you guys have a sleeve on your engine hatch actuator that is blue and has "active thunder" on it. I have finished all my projects as of today and thought that would be a nice finishing touch.
|
I don't think I've seen this sleeve before......Pics?
It may be a little late for a winter project but my drives are off and getting a checkup. I got a call today that one of them was about to come apart. I guess I'm in for a set of gears and bearings. Man I love this hobby!:D |
1 Attachment(s)
Originally Posted by boatfreak
(Post 3089828)
I don't think I've seen this sleeve before......Pics?
It may be a little late for a winter project but my drives are off and getting a checkup. I got a call today that one of them was about to come apart. I guess I'm in for a set of gears and bearings. Man I love this hobby!:D |
Thats it. Thanks. I'll see if I can get in touch with Pat tomorrow.
|
Originally Posted by laszlo01
(Post 3089567)
Very nice, lots of HP for the 32, cant wait to see a video of it running. Should blow the bikini tops off the ladys. LOL
|
Originally Posted by Griff
(Post 3089132)
You thought 850's weren't going be enough in a 32????
850's should put the boat well into the triple digits. Probably 110mph or so and will be plenty to destroy the drives and leave stains in your shorts:eek::eek: most of the parts from them. So now I have everything top to bottom brand new. I know its overkill but what else is there to do? Im looking for a 37/38 hull with out power. I'll be looking for Out drives as the wallet lets me. (may be a while) |
FYI, My boat had 750-800hp engines when it was originally built at AT and has stellings boxes and it still has the original 1.36 Bravos. It ran 103mph according to the original owner.
|
Originally Posted by Griff
(Post 3090455)
FYI, My boat had 750-800hp engines when it was originally built at AT and has stellings boxes and it still has the original 1.36 Bravos. It ran 103mph according to the original owner.
|
Originally Posted by tfarmer
(Post 3089014)
Man I am so behind! I got the 850s done and started all over with a set of 1000s
... |
Its been a long day but Rsteiny's engines are back in the boat!! Just a few trimmings and ready to run!:drink:
|
Originally Posted by blowntaylor
(Post 3106598)
Its been a long day but Rsteiny's engines are back in the boat!! Just a few trimmings and ready to run!:drink:
|
Originally Posted by KAAMA
(Post 3093864)
1000 SC's in a 32 hull???---wow...that thing's gonna haul the mail!!! :musik010: be careful
|
| All times are GMT -5. The time now is 02:15 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.