Nope, no coolers. That's with a race intake manifold, 8:71's, holley's and flame arrestors.

It's possible it could be made to fit with whipple low profile coolers and a shorter flame arrestor than I have. I also have about a 1/4" I could cut down on the carb/arrestor spacers. I think the Whippes need 2 more inches than stock?

Sick Stinger, keep in mind that your motors may be mounted higher due to your twin step vs.Panther's conventional bottom. The 575 SCi's in my '01 single step still have some clearance with the hatch closed.

Hess any pics of your boat? So you have the staggered 575? Yellow interior I believed

That's true, I don't know where they put the X on the step bottoms. However, raised mine several years ago and my propshaft is now 5 1/2" below the bottom.
http://s706.photobucket.com/user/Fun...sion%20Project

Sick Stinger, no, I have side by side 575 SCi's.

Factory 575? I thought only the stag was 575. Any pics? Thanks for your time appreciate it

Panther thankyiuvalso for you time and posts good stuff

Sick Stinger, there are (2) 36's with Mercury Racing 575 SCi's. I am not able to post attachments. PM me your email and I will send you some pics.

What prop? Speed?