36 twin step on ebay right now

Yup that's Rogers boat. Owns a body shop in NH. Boat is also listed here is the classifieds. It's build #1 of the 6/7 made. Runs just about 91/92.

Boat came home last night I'll take and post pics of my slow progress. Life gets in the vest of life. Hope to have the platform off and cleats off today. Throttle shifter set up and indicators off also for red pray. Then start reassembly

[ATTACH=CONFIG]521570[/ATTACH]Out side the shop

Looks nice. Simple/clean

Platform is off rear cleats off going to powder Monday. Platform going red. Want to break it up just a bit

Pulled the rest of the cleats off side panels and seats.
I'm going to thru bolt the seats into the dash since they are just lagged in. The cables for the drives are smoked to those need replacing also. Control assembly is screwed in that will be thru bolted. Last is the anchor locked just screwed in and missing 2 screws so I will thru bolt that as well.

[ATTACH=CONFIG]521575[/ATTACH][ATTACH=CONFIG]521576[/ATTACH][ATTACH=CONFIG]521577[/ATTACH]Couple pics

Of course you must have the apache forward lifts too, Nice!

[ATTACH=CONFIG]521603[/ATTACH]Not sure what the apache foward lifts are but here is a now shot. Anchor locker and cleat removed. Cleat will be resprayed and I'm thru bolting the locker on both sides of the hinge.