36 37 Stepped Warrior
02-25-2014 | 01:19 PM
#71
Frank's Marine Service
Joined: Sep 2002
Posts: 11,959
Likes: 142
From: Elkton, MD
Nope, no coolers. That's with a race intake manifold, 8:71's, holley's and flame arrestors.
It's possible it could be made to fit with whipple low profile coolers and a shorter flame arrestor than I have. I also have about a 1/4" I could cut down on the carb/arrestor spacers. I think the Whippes need 2 more inches than stock?
It's possible it could be made to fit with whipple low profile coolers and a shorter flame arrestor than I have. I also have about a 1/4" I could cut down on the carb/arrestor spacers. I think the Whippes need 2 more inches than stock?
02-25-2014 | 02:14 PM
#72
Registered
Joined: Oct 2001
Posts: 172
Likes: 5
From: Virginia
Sick Stinger, keep in mind that your motors may be mounted higher due to your twin step vs.Panther's conventional bottom. The 575 SCi's in my '01 single step still have some clearance with the hatch closed.
02-26-2014 | 08:32 PM
#74
Frank's Marine Service
Joined: Sep 2002
Posts: 11,959
Likes: 142
From: Elkton, MD
That's true, I don't know where they put the X on the step bottoms. However, raised mine several years ago and my propshaft is now 5 1/2" below the bottom.
http://s706.photobucket.com/user/Fun...sion%20Project
http://s706.photobucket.com/user/Fun...sion%20Project
Last edited by Panther; 02-26-2014 at 08:35 PM.
02-28-2014 | 11:58 AM
#79
Thread Starter
Brotherhood #1
Joined: Sep 2006
Posts: 12,026
Likes: 111
From: Swansea Mass
