|
Re: Anyone with a 36 calculate your prop slip?
Not yet. I sent my carbs to mesa balancing to rework. Im having the a/c pickup removed, and bungs installed the the risers to check a/f ratios. should have it wrapped up in the next 2 weeks, then ill try all the props and get with throttle up to do the final dial in.
|
Re: Anyone with a 36 calculate your prop slip?
Keep Us Posted!!!!!
|
Re: Anyone with a 36 calculate your prop slip?
Originally Posted by baja36ft
I Know They Changed The "x" In 2001 (on The 36)but Did Testing In
99 My "x" Is The Same As A 2002 A Friend Of Mine Has A 99 25 Outlaw And His "x" Is Higher Then The 2001 We Measured So Go Figure Thats Why The 2 Inch Shorties Did Not Work For Me That I Thought Would For Sure I Thought My "x" Was 1.5 Lower Then It Was. can you measure your "x" Im going to check mine and see where its at. |
Re: Anyone with a 36 calculate your prop slip?
Originally Posted by BajaRunner
hey stan
can you measure your "x" Im going to check mine and see where its at. LINES GO IN )WAS 6 OR 6 1/2 WHAT DID LAZ DO TO YOUR CARBS?? DO A SEARCH ON IMCO SHORTIES I ASKED DOCK TO MEASURE HIS.IT SHOULD BE ON THERE . |
Re: Anyone with a 36 calculate your prop slip?
I just heard from laz, he said my carbs were jacked up. the metering block was plugged on one, someone switched the powervalves from the stock 4.5's and put in 6.5's. He thinks ill get anywhere from 200-400 rpms when i get them back. Im hoping to try it next weekend and i should have the a/c pickup off by then.
|
Re: Anyone with a 36 calculate your prop slip?
Originally Posted by BajaRunner
I just heard from laz, he said my carbs were jacked up. the metering block was plugged on one, someone switched the powervalves from the stock 4.5's and put in 6.5's. He thinks ill get anywhere from 200-400 rpms when i get them back. Im hoping to try it next weekend and i should have the a/c pickup off by then.
|
Re: Anyone with a 36 calculate your prop slip?
Originally Posted by baja36ft
STOCK IS 6.5.
|
Re: Anyone with a 36 calculate your prop slip?
Stan,
do you think the 4.5's will help or hurt? |
Re: Anyone with a 36 calculate your prop slip?
I Am Not Saying 4.5 Is Not Good I Just Said That The
Stock From Merc Is 6.5 I Use A 4.5 . |
Re: Anyone with a 36 calculate your prop slip?
boat is at the fiberglass guy today getting the a/c pickup removed.
dock did you use the same fitting on the back or get a new pickup? |
| All times are GMT -5. The time now is 02:54 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.