Prop Shaft Height on Twin Engine Baja's
#1
Registered
Thread Starter
iTrader: (5)
Prop Shaft Height on Twin Engine Baja's
Interested in what others are running for propshaft height on any twin engine Baja's.
I measured on the inside and outside of my drive from the bottom of the boat at neutral trim and split the difference.
My propshaft centerline is 4 1/4" below the bottom directly in front of the drive.
I measured on the inside and outside of my drive from the bottom of the boat at neutral trim and split the difference.
My propshaft centerline is 4 1/4" below the bottom directly in front of the drive.
#3
Registered
Thread Starter
iTrader: (5)
Boat runs amazing at that height. 4 blade lab finished Bravo 30" 1.36 gears just touching 100. Handles the rough great also. Funny part is my Imco SC drives have standard length lowers! If I upgrade to Arneson obviously would run surface style herrings. But if I upgrade to a SCX it comes with a -2 shorty. I would either need a 1" or 2" spacer to run submerged props or I could semi surface a 5 blade maximus, cutting edge, or 5 or 6 blade Herring bravo style prop.
More info on my boat
http://www.offshoreonly.com/forums/b...utlaw-fun.html
More info on my boat
http://www.offshoreonly.com/forums/b...utlaw-fun.html
#6
VIP Member
VIP Member
Mine averaged out to about 3" last time I measured, as
I recall.
I recall.
#9
Registered
Join Date: Oct 2004
Location: Cincinnati, Ohio
Posts: 620
Likes: 0
Received 0 Likes
on
0 Posts