That's pretty cool.. Might have to try that if I decide to redo it

Winter Project Update:
Project 1:
Baja logo filled with Plasti-dip turned out pretty good.. Picture was taken on the day it got winterized and put in my buddy's shop for the winter.

Sad Day

Project 2:
Replacing the cellphone holder setup. The current setup is nice, they keep the phones in place(even coming back from LOTO shootout), you can charge all 4 at the same time via the dual usb ports on each side, and most importantly they keep the cupholders free for your beer but by the end of the summer they didn't get much use mainly because it's hard to get the phones in and out of the holder, you have to use both hands which is hard to do when we are moving especially if you have a mini-tablet as a phone. I also am not a huge fan of how they look they're not bad but not great either. So I've started on my 2nd custom fiberglass piece(the first being the tweeter pods I made last winter. I learned alot of what not to do from the tweeter pods so hopefully this goes a little smoother.



I also am adding a mirror as you can see so I don't have to turn around as much.

A little progress on the new cellphone holder:



Ready for fiberglass:

First layer on

First layer of body filler

First Layer is sanded now for the fun part making it completely smooth and filling in around the mirror.
Top View:


Back:


Front:

Great thread, tons of good info. This thread has made me more excited about my 26OL over any I've read. Thanks!

Thanks, I try to upload a lot of pics the upgrades and how I did it. Speaking of pics here is a few from LOTO during the shootout. Hopefully I'll have a video from the gopro/camcorder/Iphones to share soon.



Heading to the races:


Came close to stuffing it:

That last pic is awesome! I would love to go to LOTO, not sure that its really in the cards any time soon but one day I will make it happen! I would love to see a video, I will keep an eye out for you posting it.

First test fit.. not to bad considering I guessed how much body filler to put on.. a little more sanding and it should fit like a glove