Thanks ,I will call you tommorow. Darin

your mail box is full willtry later/Darin

GOODMORNING/SHOOTER/WE WILL CALL AND POST YOUR NUMBERS TONIGHT !!!!!!!!!!!!!!!!! HAVE A GREAT DAY /

yes it may not look bad here until its in your hand /there are 3 hrs in the props as we stand and a minium of 3 or more to do on these props /also shooter mentioned polishing/? I talked with him and the props are to be finished satin finish per request.( JUST IN CASE HE TAKES PICS) he does not want them thinned either but needs 300 more rpm and wants more speed/ props have alot of cavation burns on pushing side of blades will need to add cup also /its just as not as easy as it looks/and of course we all want more speed GOTTAHaveIt ,I know you were just kidding around ,I am just letting you know its more than one visually see's. OFF TO THE SHOP LATER.Darin

I'm ok with the thinning, just not the "super thin" level. The mirage plus is pretty thick to being with. I beleive you said satin was better and was less effort and cost.

HERE are the tracking numbers 1z770x270317738949/The props were insured for 1,600.00 if your lucky the will get lost Not really ,again Thanks very much for you patience long over due and be careful on the Jap Bike

Happy Easter/

Darin

Well... they sure are purdy, idled to the launch pretty good (just across the street from my lift) at least I'm lucky in some ways. I'll post the perfromance results after I finish my gel coat, bezels, chartplotter and all the other spring crap I bought.

notice the trainling edge cup vs. the originals.

250.00 each/Darin plus 15.00 shipping