My 20 Cig Project
3 Attachment(s)
I have been working on redoing my 20 Cig for about 2 years and I wanted to share some pics. I know there are quite a few people working on their own 20 projects so I hope everyone enjoys them. I know that I enjoy following projects that people have done.
My 20 Cigarette is a 1982. She is getting a complete redo. The boat is not complete but hopefully will be done this spring/summer. All of the fiberglass work will be completed by the end of December. Following some fit checks for the motor, it will then go to Phil @ Lip-Ship for paint, rigging, and interior. First pics show the condition I purchased it in. Here are some pics and I will post as the progress continues. Enjoy! Daren |
3 Attachment(s)
Just getting it ready to gut everything
|
3 Attachment(s)
Prior owner had boat primed and painted white. Third pic shows the original gelcoat color and you can see the original graphics lines as well.
|
oh, this is going to be good, thanks
going to do a minnnnnnnny of your 39 |
2 Attachment(s)
empty shell
|
2 Attachment(s)
Bottom
|
More to come in the next week.
|
Originally Posted by Wild
(Post 2757344)
oh, this is going to be good, thanks
going to do a minnnnnnnny of your 39 I am not sure what I am going to do for colors and scheme right now but I am sure Harold will have some good ideas. |
looks great what did you do with old seats? I am going rig mine with a console and high back buckets but those sure would make neat bar stools.
in my river room if you dont have plans for them What are your rigging plans I am going to use a ITS on mine either with a blackhawk of shorty bravo hooked to a 500HP. |
Originally Posted by klaw
(Post 2757357)
looks great what did you do with old seats? I am going rig mine with a console and high back buckets but those sure would make neat bar stools.
in my river room if you dont have plans for them What are your rigging plans I am going to use a ITS on mine either with a blackhawk of shorty bravo hooked to a 500HP. As far as rigging, i picked up an ITS transom assy a while back for it and a BH drive. I have the motor for it as well but I am going to wait until it is done to let that out:drink: Good luck with your project! I look forward to seeing it! |
The glass work looks mint
|
Darren,
Good luck with your project. She will make a nice addition to the Lake Winni Cig club! |
are you going to glass in a ferring or leave the little windshield
|
Originally Posted by pm203
(Post 2757403)
Darren,
Good luck with your project. She will make a nice addition to the Lake Winni Cig club! |
Originally Posted by Wild
(Post 2757421)
are you going to glass in a ferring or leave the little windshield
|
cut a step in it while you got it upside down :)
|
It's already right side up. Just finishing up the deck now.
I think she will be fast enough without it!:ernaehrung004: |
1 Attachment(s)
Originally Posted by Wild
(Post 2757445)
cut a step in it while you got it upside down :)
Or you could paint the steps in like we did here, lol |
Originally Posted by ktron
(Post 2757503)
It's already right side up. Just finishing up the deck now.
I think she will be fast enough without it!:ernaehrung004: |
Originally Posted by Wild
(Post 2757519)
so you did buy that 1075 you were looking at for the 20 - nice
|
Looks great D... We just got the gas tank in, got 75 gallons. Deck should be back on this week. everything is coming along...
|
Originally Posted by grafikworx
(Post 2757517)
Or you could paint the steps in like we did here, lol
|
Looks great!!
|
Originally Posted by offshoredrillin
(Post 2757806)
Looks great D... We just got the gas tank in, got 75 gallons. Deck should be back on this week. everything is coming along...
Thanks for the nice comments |
Originally Posted by offshoredrillin
(Post 2757806)
Looks great D... We just got the gas tank in, got 75 gallons. Deck should be back on this week. everything is coming along...
|
not to take away from your post, but how fast do these boat run? and who has the fastest one? thanks
|
ktron
if not reusing life line setup i would like to buy it |
Originally Posted by cig20
(Post 2758117)
ktron
if not reusing life line setup i would like to buy it |
Thanks
|
Originally Posted by JUSTGOLF
(Post 2758108)
not to take away from your post, but how fast do these boat run? and who has the fastest one? thanks
[YOUTUBE]<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/sLEfsKM0z84&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/sLEfsKM0z84&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>[/YOUTUBE] |
thanks b, that is unreal:evilb:
|
Originally Posted by cowisl
(Post 2758052)
What size tank did they originally have?
|
nice stuff!
|
3 Attachment(s)
Some updates...
|
3 Attachment(s)
Glasswork is complete.
We removed the deck storage and glassed over. I wanted the old school look but I was worried the deck hatch would make noise slapping around. |
1 Attachment(s)
ready to rig!
|
what did you set the x dim at for the ITS and blackhawk?
|
looks great!
|
Awesome work! Did you remove the storage well or wells in the engine compartment or were they never installed? Thanks
|
Originally Posted by goin70
(Post 2770630)
Awesome work! Did you remove the storage well or wells in the engine compartment or were they never installed? Thanks
|
All times are GMT -5. The time now is 03:46 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.