Stainless marine gen 3s.

I am not an engine guy so I can’t give you a good answer between the green and the black, performance wise.

I have a straight bottom Cigarette I don’t think that 2 or 3 or 10 horse power will make that big of a difference in my speed.
I know they work well and look better then any stainless marine exhaust manifold. And they will rattle your teeth out of your head if you are into that sort of thing.

I am not knocking the stainless marine exhaust they work well from what I understand.

Good info, thanks darren. I love the looks of the green!

Thanks and the green are big and in your face. They belong on a nice boat.

of course I forgot to go by the boat this afternoon...but I think mine are the green...
when you look at Darren's they are definitely leaning farther back than mine?
here's a side shot...

Checked the invoice and mine are Gray.....

Here is what blacks looked like on my boat. 33.5" centers on Tall-deck blocks

Wow 33.5" centers....the guys who rigged mine must have not been able to count its on 38"

So.... you made me go back and search for it :

http://www.offshoreonly.com/forums/c...ank-width.html

My bad.... 34.5" centers. Not sure what it was from the factory with the #3's, but TNT in Miami did the #6 conversion.