|
1 Attachment(s)
[ATTACH=CONFIG]518430[/ATTACH]
Primed and ready |
Every post is more impressive than the last. Good work Casey
|
4 Attachment(s)
Made the inter transom plates so had to block off the exhaust on the gembles too
Front hole [ATTACH=CONFIG]518475[/ATTACH] [ATTACH=CONFIG]518477[/ATTACH] Bottom holes [ATTACH=CONFIG]518478[/ATTACH] [ATTACH=CONFIG]518479[/ATTACH] |
Starting to come together. Need to get with you one day when you're going over there.
|
1 Attachment(s)
I'll let you know next time John. Should be going over there shortly with in the next week or so.
Back of gemble hole. Was way easer then I expected to weld being cast. [ATTACH=CONFIG]518502[/ATTACH] |
1 Attachment(s)
A little teaser
[ATTACH=CONFIG]520444[/ATTACH] |
Looking good Casey!
|
1 Attachment(s)
Sprayed imron on the gembles came out great. Laid down flat and shinty. The old TRS stuff is not perfect so the ruff shows but looks good.[ATTACH=CONFIG]520690[/ATTACH]
|
4 Attachment(s)
[ATTACH=CONFIG]520893[/ATTACH]
Gel coated should get imron this week! [ATTACH=CONFIG]520894[/ATTACH] [ATTACH=CONFIG]520895[/ATTACH] [ATTACH=CONFIG]520896[/ATTACH] |
You got a month you better hurry.
|
| All times are GMT -5. The time now is 03:55 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.