IMO 1 inch below the bottom with 750s and going 83 mph, your drive height is not holding you back. Even with the 900s I would start with the drives where they are.

Doesn't your boat have a spacer in the drive now? If so try it without the spacers when you put in more power.

What is Old School's take on this - he drove the boat with big power and modest power. Experience is worth way more than bench racing.

Kris I think you should sell me your heads at a super price, desktop dyno says they`d work really well for me, plus you need something new for your new set up anyway.\

Nope. They will work fine on the new motors.

I don`t like your attitude!!

Maybe kris should get some AFR 265 ovals. He might break his arnesons with all that torque

yep and one of bob's cams will put him in the 120 mph range...

He says to leave them alone, so that's what I'm doing.

Seems so much longer but I only got this boat a year ago...

A little compilation I put together of the last couple years:

http://33outlaw.zenfolio.com/img/s10...748436-215.mp4






and now some fall/ winter projects:


city won`t let me build a garage so next best thing :




Add a 6x6x18 I beam with trolley







Now I host engine pulling parties!










Real high class operation going on here:




All ready for some upgrades/changes:

Can I bring my boat over for an engine-pull? I really just wanna hang out with the cool kids...

Mike its a party here every weekend, always some adventure , you can come by anytime buddy, lets pull your motors and drives!!! We`ll have all winter to go thru em