Great Job I'm thinking a dyno video is in the future ????

Yes I will have dyno videos!!

Both Short blocks are together!! Joe is going to come out this weekend and measure pushrods and degree the cams!!


Mounting the Pistons on the Rods
http://i1123.photobucket.com/albums/...ps770deeab.jpg




Loosening the rod bolts in the rod vice
http://i1123.photobucket.com/albums/...psabc918cd.jpg




All the pistons installed on the rods (Put them back in the bags till I was ready to install them in the block)
http://i1123.photobucket.com/albums/...pscce46a23.jpg

Setting the Ring Gaps
http://i1123.photobucket.com/albums/...ps761c18ed.jpg




All rings gaped to their cylinder
http://i1123.photobucket.com/albums/...ps0d95069b.jpg




Installing the rings on the pistons
http://i1123.photobucket.com/albums/...psbd463400.jpg




Oil Rail Support
http://i1123.photobucket.com/albums/...ps97711882.jpg




All the Rings Installed
http://i1123.photobucket.com/albums/...ps684e047b.jpg




Dropping the piston into the bore!
http://i1123.photobucket.com/albums/...psc687647b.jpg




Installing the rest of the pistons
http://i1123.photobucket.com/albums/...ps427a9f01.jpg




Torqued all the rod bolts!
http://i1123.photobucket.com/albums/...ps7c316e74.jpg




Both 540ci Short Blocks ready to go!!
http://i1123.photobucket.com/albums/...ps1981e933.jpg

Thanks for the update!

You should be 548 with the 4.530 bore, shouldn't ya?

Yes you are correct it is a 548 now!!

Joe from Fast Forward came out tonight. We checked everything below on both engines!

Joe Degreed both cams

Checked piston to valve clearance with a dial indicator. (Had a mile of clearance!!)

Checked Valve radial clearance (Again had a mile of clearance!)

Measured Pushrods. Both engines use the same length pushrods but never the less we measured both engines!

Checked camshaft position with the lifters

Checked Camshaft endplay

& Thanks again for all your help with these engines Joe!!



Action Pics (Cam Specs we needed were in the book!)
http://i1123.photobucket.com/albums/...psd7b1c1bb.jpg




http://i1123.photobucket.com/albums/...psaa7f50d7.jpg




Mr. Fast Forward himself!! Measuring Pushrods!
http://i1123.photobucket.com/albums/...ps53e273af.jpg




http://i1123.photobucket.com/albums/...ps4c788cc0.jpg

WOW shows how rewarding being maticulous can be! Great job your doing

Joe scheduled my dyno time in 2 weeks! I have some work to do now!! :lolhit:

I will try to post picture updates over the next few weeks. I will definitely post everything when the dyno is finished!!