Joe Ill get some pics for you later today or tomorrow.

Thanks Casey, and Jbraun, j really like your Bullet, top notch...since everyone is saying about the trailer, here are a few pics of the upgrade on that....the boxes are $149 habor freight specials, I notch them out to fit over the rail of the trailer, it was pretty easy cut the box where it was going to sit on the rail, then took the piece I cut and flipped it upside down and welded it back in, had to put 2 little pieces in the corners, than sanded them and painted them the same white as the truck and painted the CIG logos on, in fact everything that was galvanized or painted on the trailer I painted white, I put a piece of diamond plate where the crank is at and on the lids of the boxes, so if you want to stand there or get on the deck, it's a little easier, the fender were $100 for the pair, welded some small angle on the underside of them for support, so you can stand on them if need, diamond plate on them also, made steps for the front and rear of the fender also gives support to the fenders, and made a bow catcher in stead of the old rollers...the only thing I want to make is a drive guard....well here are some pics of that stuff[ATTACH=CONFIG]503322[/ATTACH][ATTACH=CONFIG]503323[/ATTACH][ATTACH=CONFIG]503324[/ATTACH][ATTACH=CONFIG]503325[/ATTACH][ATTACH=CONFIG]503326[/ATTACH][ATTACH=CONFIG]503327[/ATTACH][ATTACH=CONFIG]503328[/ATTACH][ATTACH=CONFIG]503329[/ATTACH][ATTACH=CONFIG]503330[/ATTACH][ATTACH=CONFIG]503331[/ATTACH]

more trailer stuff...[ATTACH=CONFIG]503332[/ATTACH][ATTACH=CONFIG]503333[/ATTACH][ATTACH=CONFIG]503334[/ATTACH][ATTACH=CONFIG]503335[/ATTACH][ATTACH=CONFIG]503336[/ATTACH][ATTACH=CONFIG]503337[/ATTACH][ATTACH=CONFIG]503338[/ATTACH]

Thanks, I might have to borrow your idea on the trailer boxes. Like I said before, awesome work!

Go ahead J that's why I posted it, if I can be any help let me know....going to try to finish painting the bilge today, that was the plan for yesterday, but storms kept popping up, using Sherman Williams paint and man that stuff is great, thanks Fixx for recommending it...

Love the paint on the boat. Very nice job on the trailer. Looks like you had to put more grunt work into the trailer than the boat. Well done.

She's running good so far, love the Whipple's, fire right up, idle at about 800, like a 525 around the dock and have a lot of pull when you get into it. I haven't had time to start dealing with props yet though, I'm under-proped though, currently have 16x25 4 blades and I think I need something like 17x28-30 or so...

Keep the pictures coming on your project!

Well got some time its raining again....got 2 coats on one side of the bilge, got 1 coat on the other side, I'm really tired of paint stuff...hope this is the last thing, oh crap it's not still got to paint the cabin door...oh well.. here are few pics of the stuff I painted plus the boat and the stuff on trailer....[ATTACH=CONFIG]503405[/ATTACH][ATTACH=CONFIG]503406[/ATTACH][ATTACH=CONFIG]503407[/ATTACH][ATTACH=CONFIG]503408[/ATTACH][ATTACH=CONFIG]503409[/ATTACH][ATTACH=CONFIG]503410[/ATTACH][ATTACH=CONFIG]503411[/ATTACH][ATTACH=CONFIG]503412[/ATTACH][ATTACH=CONFIG]503413[/ATTACH][ATTACH=CONFIG]503414[/ATTACH]

Looks great! I love the yellow Half-90 version!

X2

Keep the pics coming!