![]() |
I really like all the screens and being able to see all the gauges
|
Icdedppl, sounds like the Holley is handling all the ignition functions as well as the fuel side ? So you'd lose a lot of the features you mention if you just bought it for the fuel injection and kept the original ignition? Great job. What you learned and did with your engines probably deserves it's own thread in addition to the one you already have.
|
Originally Posted by division1
(Post 4719125)
I love that stuff !!!! Wish I could afford all that !!!!going to have to think all this over
|
That’s what I’m trying to figure out if I can just run my msd and just buy injection
|
Originally Posted by bck
(Post 4719138)
Icdedppl, sounds like the Holley is handling all the ignition functions as well as the fuel side ? So you'd lose a lot of the features you mention if you just bought it for the fuel injection and kept the original ignition? Great job. What you learned and did with your engines probably deserves it's own thread in addition to the one you already have.
Fuel injection alone might be fine for NA motor. With a blower you want a 3D map to control fuel and timing based on boost . IMOP that`s the safest/better set up. With the coil on plug there`s no need for a distributor so Alex recommended the Holley dual sync which is much simpler to install and set up then a crank trigger. https://cimg8.ibsrv.net/gimg/www.off...1682a2a4e8.jpg https://cimg8.ibsrv.net/gimg/www.off...44719c569a.jpg and I was going to make a post with step by step how I set up everything but ever since I pissed off sydeways it`s been very difficult to log on (didn ban me but had to use a different browser to log on ....till this new version ) so I said fuc%$ that site . |
I'm so pissed off at carbs I'm considering switching. Just n.a. but still won't idle / shift for **** and no one I know locally has been able to fix it despite hours of effort. Shouldn't be this hard.
|
Well I have seen carb engines that are tuned correct run very well. I think all set ups have there problems. I have seen efi run very well but I have also seen efi have problems and take a lot of time and money to chance down. I think it’s all in luck of the draw and a good tuner whether he is armed with a screw driver for a carb or a lab top for efi lol
|
Originally Posted by bck
(Post 4719149)
I'm so pissed off at carbs I'm considering switching. Just n.a. but still won't idle / shift for **** and know one I know locally has been able to fix it despite hours of effort. Shouldn't be this hard.
|
Originally Posted by bigboat28
(Post 4719152)
Send them to Nickerson.
|
Originally Posted by division1
(Post 4719150)
Well I have seen carb engines that are tuned correct run very well. I think all set ups have there problems. I have seen efi run very well but I have also seen efi have problems and take a lot of time and money to chance down. I think it’s all in luck of the draw and a good tuner whether he is armed with a screw driver for a carb or a lab top for efi lol
|
| All times are GMT -5. The time now is 07:17 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.