Seems to be very common I’m completely redoing it and making that one big bulk head that ties into the sides and goes around the cabin door. Know that the liner is out

Did you cut that tabbing, or did it break clean like that?

Broke clean that pic is how I found it I have seen a few this was

It did look good!!! We had already updated interior when we bought it never really planned on ever getting this far into it but it just kept snowballing.

How do you guys feel about bilge colors I was always set on white but the shark gray is kinda appealing ? Any thoughts kinda was kicking around the idea. I’m reAlly thinking sides are going to be dark silver and the deck like a merc blue. Engines are going to be blacked out.

White shows dirty so easy, that's why I love my red, but red won't be right in yours, I would smooth it and paint the same silver as boat, would be so nice haha

is this behind closet? So far mine didn't have of these issues I wanna check that also.

found this on my bullet to at the dash

Seems to be a very common issue. They way it is put together really isn’t the best. With everything removed I’m making that a bulk head that goes from side to side and will run all the way up. That will really help stiffen up the dash area a lot of the ones I have seen that break loose the end up hiring the side when the boat it flexing and end up putting a impact load spider crack on the outside. I had that as well and ground it all down and glassed it up then regeled

Ground down area with small hair line cracks put one layer of 1.5 material

Structure faring compound

Other side

After glass

Gel coat application