Tank “Back in the Saddle Again”
#1043
#1044
#1049
VIP Member

Joined: Jun 2021
Posts: 3,533
Likes: 2,142
From: SW Ohio
Product push - was told to try this white diamond polish by a few people. Stuff is the bomb!! Hit the props with it today. Easy on. Buff with soft terry cloth and then finish with ultra soft micro fiber.
can’t wait to hit motors with it.
first pic is before. Others are after.
highly recommend.




can’t wait to hit motors with it.
first pic is before. Others are after.
highly recommend.






They didn’t come out as well as your props did, but they are far better than they were after the ScotchBrite, and a far cry better than they were all black from soot.
Thanks. Brad.
#1050
Yup. I spent some time today scrubbing the baked-on carbon/soot from my exhaust tips. I had to use ScotchBrite to get the carbon off to begin with, which dulled them significantly. I tried using some rubbing and polishing compound (I had TurtleWax on hand), but it was just smearing and didn’t do much to clean up the microscratches. I need to go back with some decent rubbing and polishing compound, but I decided to give the WhiteDiamond a crack at it….


They didn’t come out as well as your props did, but they are far better than they were after the ScotchBrite, and a far cry better than they were all black from soot.
Thanks. Brad.


They didn’t come out as well as your props did, but they are far better than they were after the ScotchBrite, and a far cry better than they were all black from soot.
Thanks. Brad.







