Griff

Camden on the Lake aka H Toads at 7mm.

SB

iTrader: (1)

I used to be on a several car circle track team. One driver loved to hit stuff, it seamed. Sponsorship low in those levels. Yearly budget even with several people free labor, was staggering too. Lots of forms of racing not any better than high perf boats. Doh !

Wildman_grafix

I'll say it to, Transom? Filling in so you can go to dry sump VI's?

BDiggity

Where did you get those Hawk Power valve covers? Mine are the older grooved style.

ICDEDPPL

iTrader: (1)

It`s the back of the boat that the drives attach to.. hope this helps .

They were on the boat when I bought it .

The transom was fresh when I bought the boat but holes were sealed with 4200 or some kind of silicone , well that didnt last . Was wondering why my transom assembly bolts always loose till water came out of the bolt holes .

I thought about 6`s but then I read the fun those guys in Florida had switching from 5`s to 6`s and said naaaw I`m good.

1Zoom

Dan, if you do go with VI's those V's will look good on my Cafe. ( I know you may change your mind at the last min.)