SCX's on a 38 Topgun
The following 5 users liked this post by Quinlan:
Drake22.250 (08-31-2023), HOSSMAN (08-31-2023), kreed (09-28-2023), masi242 (09-01-2023), speicher lane (08-31-2023)
08-31-2023, 06:58 AM
#12
VIP Member
VIP Member
prob about 75-100 hours on them and im not easy on anything. i like going fast, ran them for a season with the xr lowers and went with -2 sc lowers and it really woke the boat up. been running 5 blades for the past month with the ring cut off and seems to be fine, havent done a speed run with the 5 blades, but won the local shootout for 36-42 ft boats. full tanks and 6 people still runs over 90mph. i run 70-72 at 4k rpms and barely in boost if it doesnt sell, i may turn the 509s into 540s and do dual downshaft and cleavers, that should put me to 1175 ish per side. besides the whipples they have been the best upgrade i have done.
Last edited by offshoredrillin; 08-31-2023 at 07:04 AM.
08-31-2023, 07:08 AM
#13
Registered
Every time you post that pic with the Apache the ECPICALLY COOL factor is over the top!
The following users liked this post:
HOSSMAN (09-01-2023)
09-27-2023, 09:06 AM
#15
Registered
We installed SCX with Teague SC lowers on my friends 38 TS w/ turned up 575's.
On the 3rd season and no issues at all. It would eat about 1 Bravo per year.
On the 3rd season and no issues at all. It would eat about 1 Bravo per year.
The following 3 users liked this post by c0ncEpT:
09-27-2023, 09:17 AM
#16
Platinum Member
Platinum Member
iTrader: (6)
Whats the difference between a Teague SC lower and a stock one from Imco ?
09-27-2023, 11:54 AM
#18
Registered
