HORBA Forum
#31
Registered
Join Date: Aug 2006
Location: Risoer ,SOUTH NORWAY
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Re: HORBA Forum
Some more photos of engine and inj system. bore is 4,25 and stroke is 4,25. Roller cam with aprox 0,7" lift , stainless roller lifters, Carillo rods
Best regards Joern
Best regards Joern
#35
Registered
Join Date: Aug 2006
Location: Risoer ,SOUTH NORWAY
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Re: HORBA Forum
Originally Posted by Black Tornado
36widebody,I have the old catalog of the Aeromarines.
If you are interested I can scan it for you and send by e-mail.
If you are interested I can scan it for you and send by e-mail.
The guy who had the engines lost his copy and that would be a nice part of the documentation for the restored Aeromarine 3.
Regards Joern
Last edited by 36widebody; 10-07-2006 at 06:28 AM.
#36
Registered
Join Date: Aug 2006
Location: Risoer ,SOUTH NORWAY
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Re: HORBA Forum
Originally Posted by SUNSATION 25
Those velocity stacks are awesome!!!!!!
Yes they are impressive and the same configuration as the Can-Am setup GM used. Rumers say they are from Crower but all over there is Kiekhaefer casting marks. We might go with todays technology and EFI with el-injectors if we are unable to manage the mechanical system, the dyno run will show. As you can se on the enclosed pic bosses are already cast on the lower part of the manifold, but not yet machined.
reg Joern