Offshoreonly.com
Page 4 of 4
« First
2
3
4
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Classic Offshore (https://www.offshoreonly.com/forums/classic-offshore-199/)
-   -   Kaama Engine pic (https://www.offshoreonly.com/forums/classic-offshore/344531-kaama-engine-pic.html)

bck 02-13-2017 10:59 AM
Originally Posted by CDShack (Post 4528547)
Mine were originally Innovation. 1984.
Mine were 86. I've always wondered if the bow tie blocks were original or if the blocks were replaced. All the other accessories were original.

tommymonza 02-13-2017 11:07 AM
Yea I redid a 1985 SR1 that sunk in 86. Had 425s that were built at Innovation.don't remember the tailpipes being dry though

I'CE 02-13-2017 11:49 AM
Originally Posted by TruxtonFox (Post 4528533)
So the Kaama manifolds and tails are a totally dry pipe? I did not know that
Dry to the end of the long straight pipe/tip only,

TruxtonFox 02-13-2017 11:53 AM
Thinking in terms of cam choice with these, pretty well a dry pipe with no worries of reversion

I'CE 02-13-2017 12:08 PM
Originally Posted by bck (Post 4528525)
No.
email your addy and you shall receive !


All times are GMT -5. The time now is 02:31 PM.
Page 4 of 4
« First
2
3
4
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.