spread bore carb to square bore intake
#1
Registered
Gold Member
Thread Starter
spread bore carb to square bore intake
what the phuck should i use to adapt my qjet to my edelbrock performer rpm intake? all i can find is stuff for single plane intakes
#4
Registered
Gold Member
Thread Starter
how do the carb adapters hurt performance? I found this one and it looks to be ok.
http://www.summitracing.com/parts/SUM-G1401/
or any suggestions on a 650 cfm squarebore marine carb would be helpful, something that doesnt require a lot of mods to make it work correctly, i have heard horror stories about stuff not fitting right
http://www.summitracing.com/parts/SUM-G1401/
or any suggestions on a 650 cfm squarebore marine carb would be helpful, something that doesnt require a lot of mods to make it work correctly, i have heard horror stories about stuff not fitting right
Last edited by 87MagnumII; 10-22-2010 at 06:41 AM.
#5
Charter Member # 55
Charter Member
how do the carb adapters hurt performance? I found this one and it looks to be ok.
http://www.summitracing.com/parts/SUM-G1401/
or any suggestions on a 650 cfm squarebore marine carb would be helpful, something that doesnt require a lot of mods to make it work correctly, i have heard horror stories about stuff not fitting right
http://www.summitracing.com/parts/SUM-G1401/
or any suggestions on a 650 cfm squarebore marine carb would be helpful, something that doesnt require a lot of mods to make it work correctly, i have heard horror stories about stuff not fitting right
#7
Registered
how do the carb adapters hurt performance? I found this one and it looks to be ok.
http://www.summitracing.com/parts/SUM-G1401/
or any suggestions on a 650 cfm squarebore marine carb would be helpful, something that doesnt require a lot of mods to make it work correctly, i have heard horror stories about stuff not fitting right
http://www.summitracing.com/parts/SUM-G1401/
or any suggestions on a 650 cfm squarebore marine carb would be helpful, something that doesnt require a lot of mods to make it work correctly, i have heard horror stories about stuff not fitting right
#8
Registered
We have the adapter also if you end up needing it......
http://www.cpperformance.com/p-13329...r-adapter.aspx
http://www.cpperformance.com/p-13329...r-adapter.aspx
#9
Registered
iTrader: (2)
Join Date: Aug 2005
Location: Between A Womans Leggs in IL
Posts: 6,306
Likes: 0
Received 1 Like
on
1 Post
Fixx
i dont know it you have thease http://compare.ebay.com/future/39024...=263602_304672 But if it is the one in the pic shown you dont need a adaptor, the intake is drilled for both a 4150 and a q-jet..
#10
Registered
Gold Member
Thread Starter
i dont know it you have thease http://compare.ebay.com/future/39024...=263602_304672 But if it is the one in the pic shown you dont need a adaptor, the intake is drilled for both a 4150 and a q-jet..