Quick Fuel Carbs...
12-23-2012 | 09:47 PM
#71
Fast Singles Club
Joined: Oct 2011
Posts: 4,042
Likes: 490
From: Raystown Lake , Pa.
Whats it gonna be MT first its several pistons each engine now it's just one piston, then its faulty gauges, then fuel pressure.. I think this could have all been avoided by either reading the plugs or installing bungs for the sensors to read the AFR's..
Pick one story and stick with it!!!!
Pick one story and stick with it!!!!
12-23-2012 | 10:02 PM
#72
Registered
Joined: Aug 2005
Posts: 6,306
Likes: 1
From: Between A Womans Leggs in IL
fixx
Buddy , how bout you get your tired goat smellin azz on up out of this thread and take your rants back to the other thread . No one here wants to read your bullchit . What the hell is wrong with you . You have already proven you can pizz further than anybody else in that thread by comin in here but now it's gettin on me . Shut your puder off , kick your dog and go set your Christmas tree on fire . Are you happy now that you got me pissed off ?
HA HA HA HA HA ROLMAO..
and he drives a BAHA HA HA with rotted stringers..P.S. i garentee it!! your stringers are rotten!
12-23-2012 | 10:29 PM
#74
Registered
Joined: Aug 2005
Posts: 6,306
Likes: 1
From: Between A Womans Leggs in IL
12-23-2012 | 10:31 PM
#75
Registered
Joined: Oct 2004
Posts: 620
Likes: 0
From: Cincinnati, Ohio
Buddy , how bout you get your tired goat smellin azz on up out of this thread and take your rants back to the other thread . No one here wants to read your bullchit . What the hell is wrong with you . You have already proven you can pizz further than anybody else in that thread by comin in here but now it's gettin on me . Shut your puder off , kick your dog and go set your Christmas tree on fire . Are you happy now that you got me pissed off ?
Merry Christmas!!
12-23-2012 | 10:35 PM
#76
Registered
Joined: Aug 2005
Posts: 6,306
Likes: 1
From: Between A Womans Leggs in IL
fixx
Sorry there dude.. All I wanted to know with my first post was who built the engines! Come to find out Mike did, and he was using Quick Fuel carbs on the engines that melted down after 5 min run time. MT threw out his 2 cents, Mrfixall followed.. I was just trying to figure out who tuned the engines on the dyno because its quite obvious the melt down happened because they went lean..
Merry Christmas!!
Merry Christmas!!
Im going to turn my little sister loose on the next post....
12-23-2012 | 11:01 PM
#77
Registered
Joined: Oct 2004
Posts: 620
Likes: 0
From: Cincinnati, Ohio
12-23-2012 | 11:10 PM
#78
Registered
Joined: Aug 2005
Posts: 6,306
Likes: 1
From: Between A Womans Leggs in IL
fixx
So you going to take my money to let me drill holes all over your boat to show you where all the baja's rot? and then give it back to me? i have fixed quite a few baja boat's stringer's in your boat's era..and believe me just because theirs glass over the wood dont mean its solid as a rock unless you had it fixed already..
12-23-2012 | 11:11 PM
#79
Registered
Joined: Oct 2004
Posts: 620
Likes: 0
From: Cincinnati, Ohio
Buddy , how bout you get your tired goat smellin azz on up out of this thread and take your rants back to the other thread . No one here wants to read your bullchit . What the hell is wrong with you . You have already proven you can pizz further than anybody else in that thread by comin in here but now it's gettin on me . Shut your puder off , kick your dog and go set your Christmas tree on fire . Are you happy now that you got me pissed off ?
And if you go back and look post #41 is where this thread got off topic!!!
12-23-2012 | 11:14 PM
#80
Registered
Joined: Oct 2004
Posts: 620
Likes: 0
From: Cincinnati, Ohio
So you going to take my money to let me drill holes all over your boat to show you where all the baja's rot? and then give it back to me? i have fixed quite a few baja boat's stringer's in your boat's era..and believe me just because theirs glass over the wood dont mean its solid as a rock unless you had it fixed already..
