Offshoreonly.com
Page 9 of 9
« First
7
8
9
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Do It Yourself, Boating on a Budget (https://www.offshoreonly.com/forums/do-yourself-boating-budget-249/)
-   -   Race hatch or Big blower scoops? (https://www.offshoreonly.com/forums/do-yourself-boating-budget/293297-race-hatch-big-blower-scoops.html)

Rookie 03-26-2013 08:21 PM
Originally Posted by blue thunder (Post 3893036)
Let me know rookie, I actually like the second one down. They would be for my blower hatch though facing forward, not the side vents. They go in the same position as the vents Mild Thunder showed on his race hatch. I don't have the stock hatch anymore.
PM me your email again and I will send you everything I have. I am going to manipulate these for my scoops also.

blue thunder 03-27-2013 02:30 PM
Originally Posted by ICDEDPPL (Post 3890732)
Thats why my guy said he`d have to draw it out.. my question still stands thou.. what do you need done?
ICDEDPPL rookie sent me dxf files for the vent cutouts in his prior posts. Do you have a guy that could cut these for me out of stainless?

Thanks again for the dxf templates rookie!

sonic700 03-27-2013 03:48 PM
Sorry B.T. I was out of town. Its Kirco Precision Tool 708-705-6699 and his name is Ed. Always nice to have options. ICDEDPPL has the hook up though

blue thunder 03-27-2013 06:10 PM
Originally Posted by sonic700 (Post 3893780)
Sorry B.T. I was out of town. Its Kirco Precision Tool 708-705-6699 and his name is Ed. Always nice to have options. ICDEDPPL has the hook up though
Great, thanks sonic.

Rookie 03-27-2013 09:29 PM
Originally Posted by blue thunder (Post 3892312)
These are exactly what I need cut out of stainless steel for my blower hatch. Are these DXF files rookie? I need 2 of those that are about 26 x 5 and are angled on the ends like Mild Thunders on his race hatch.
Post a pic of your blower hatches. I have 2 Harwood scoops that I need build into an new hatch.

blue thunder 03-29-2013 09:07 AM
Originally Posted by Rookie (Post 3894040)
Post a pic of your blower hatches. I have 2 Harwood scoops that I need build into an new hatch.
Check your email rookie for pics. My hatch I believe was off a 31 scarab viper. I had to make it fit but it worked out pretty well. I can fit blowers and a raised 2" set of engines under it.

turtle1678 04-02-2013 09:19 PM
Sonic do you keep your boat at Hammond Marina?

wannabe 04-03-2013 08:23 AM
Originally Posted by MILD THUNDER (Post 3890116)
I need to figure something out for my back seat. Now that the original sunpad is gone, which kinda overlapped into the back seat, it looks funky now. :(
Mild- This isn't as tough as you think. Take some cardboard and make a template of what you need to fill in- make it out of sheet aluminum. Take it to your marine/auto trim shop and have them glue foam to it and cover it with vinyl. Add snaps to the back, and snaps to your cover. Bingo

Wannabe

sonic700 04-03-2013 06:22 PM
Originally Posted by turtle1678 (Post 3897600)
Sonic do you keep your boat at Hammond Marina?
I sure do. Are you from the area?


All times are GMT -5. The time now is 11:13 PM.
Page 9 of 9
« First
7
8
9
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.