454 with 177 blower build
03-16-2015 | 05:57 PM
#171
Thread Starter
Registered
Joined: Mar 2010
Posts: 458
Likes: 0
From: Las Vegas, NV
Black Baja - do you have pics of the 3" blowre pulleys you have? I'm dynoing with the stock 3.5 upper and 7 lower. Depending on how much/(little) boost I have I may be in need of your pulleys.
03-16-2015 | 06:43 PM
#173
Registered
Joined: Nov 2001
Posts: 3,393
Likes: 6
From: IBX
20 years on the chesapeake this year so yes, my stomping ground for sure. I keep my floating condo (carver) slipped at the mouth of the susquehanna river and run out of there. How about you?
03-16-2015 | 06:44 PM
#174
Registered
Joined: Nov 2001
Posts: 3,393
Likes: 6
From: IBX
03-16-2015 | 06:47 PM
#175
Registered
Joined: Aug 2013
Posts: 621
Likes: 0
From: Newark, DE
I run out of the Bohemia, hacks point. My buddy knows you, said your Panther runs pretty good lol
03-16-2015 | 06:53 PM
#176
Registered
Joined: Nov 2001
Posts: 3,393
Likes: 6
From: IBX
03-16-2015 | 07:32 PM
#177
Registered
Joined: Aug 2013
Posts: 621
Likes: 0
From: Newark, DE
03-16-2015 | 08:57 PM
#179
Thread Starter
Registered
Joined: Mar 2010
Posts: 458
Likes: 0
From: Las Vegas, NV
03-16-2015 | 10:03 PM
#180
Registered
Joined: Oct 2007
Posts: 8,439
Likes: 93
From: yorkville,il
Another difference is I saw Mike dyno'd at 36 degrees timing where we did at 34 degrees. We dropped timing back to 33 so see if with the combustion chamber being more efficient it liked less timing better, it didn't the change was about 2-3hp going from 34 back to 33. I'm not sure if there is any gain or not going up, 34 could be the sweet spot but don't know for sure. Mike did you play with timing under that 36 degrees you used?
