Offshoreonly.com

Go Back  Offshoreonly.com > Technical > Do It Yourself, Boating on a Budget
Build engine >

Build engine

Register
FAQ
Calendar
Today's Posts
Search
Vendor Directory
Notices

Build engine

Thread Tools
 
Old 07-11-2022, 12:41 PM
  #101  
Registered
Thread Starter
 
Join Date: May 2022
Location: Croatia
Posts: 255
Likes: 0
Received 89 Likes on 34 Posts
Default
Originally Posted by Zole
Ok i'll do it for the hell
And if sombody can tell me why my exoust got so hot...
Zole is offline  
Reply
Old 07-11-2022, 01:13 PM
  #102  
Platinum Member
Platinum Member
iTrader: (6)
 
F-2 Speedy's Avatar
 
Join Date: May 2012
Location: Midwest & T-Rock
Posts: 10,418
Received 3,051 Likes on 1,357 Posts
Default
its usually caused by lack of water flow through the exhaust, did it just happen on one side or both ?
F-2 Speedy is online now  
Reply
Old 07-11-2022, 01:17 PM
  #103  
Registered
Thread Starter
 
Join Date: May 2022
Location: Croatia
Posts: 255
Likes: 0
Received 89 Likes on 34 Posts
Default
Originally Posted by F-2 Speedy
its usually caused by lack of water flow through the exhaust, did it just happen on one side or both ?
The amount of water was good new exoust and impeler
Zole is offline  
Reply
Old 07-11-2022, 01:25 PM
  #104  
Platinum Member
Platinum Member
iTrader: (6)
 
F-2 Speedy's Avatar
 
Join Date: May 2012
Location: Midwest & T-Rock
Posts: 10,418
Received 3,051 Likes on 1,357 Posts
Default
did you back flush the system ? you could have blockage in the coolers
F-2 Speedy is online now  
Reply
Old 07-11-2022, 01:29 PM
  #105  
Registered
 
Join Date: Feb 2005
Location: cincinnati,oh.
Posts: 560
Received 43 Likes on 31 Posts
Default
I would try and get a small bore a scope (camara) and try to look in the cylinders.
fbc25el is offline  
Reply
The following users liked this post:
cheech (07-11-2022)
Old 07-11-2022, 01:36 PM
  #106  
Registered
Thread Starter
 
Join Date: May 2022
Location: Croatia
Posts: 255
Likes: 0
Received 89 Likes on 34 Posts
Default
Originally Posted by F-2 Speedy
did you back flush the system ? you could have blockage in the coolers
But i had a good amount of water coming aut of the exoust
Zole is offline  
Reply
Old 07-11-2022, 01:37 PM
  #107  
Registered
Thread Starter
 
Join Date: May 2022
Location: Croatia
Posts: 255
Likes: 0
Received 89 Likes on 34 Posts
Default
Originally Posted by fbc25el
I would try and get a small bore a scope (camara) and try to look in the cylinders.
That is a good idea...maybe if i can find it somwere
Zole is offline  
Reply
Old 07-11-2022, 01:56 PM
  #108  
Registered
iTrader: (2)
 
Join Date: Aug 2010
Location: Cape Coral FL
Posts: 2,110
Received 419 Likes on 252 Posts
Default
Originally Posted by Zole
And if sombody can tell me why my exoust got so hot...
You will probably see why it got so hot when you pull the head off to replace the piston. My bet is that the piston is melted and the head gasket blown between cylinders
snapmorgan is offline  
Reply
The following users liked this post:
cheech (07-11-2022)
Old 07-11-2022, 02:00 PM
  #109  
Registered
Thread Starter
 
Join Date: May 2022
Location: Croatia
Posts: 255
Likes: 0
Received 89 Likes on 34 Posts
Default
Originally Posted by snapmorgan
You will probably see why it got so hot when you pull the head off to replace the piston. My bet is that the piston is melted and the head gasket blown between cylinders
Piston melted i bet...
Zole is offline  
Reply
Old 07-11-2022, 02:42 PM
  #110  
Registered
 
Join Date: Aug 2010
Posts: 1,308
Received 516 Likes on 306 Posts
Default
Post a pic of the plug number. Obviously there are deeper issues, but it does look like a longer reach plug than what the heads take.
So kind of curious.
cheech is offline  
Reply



Advanced Search

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.